VIDEO: Replacement Long Block Engines

VIDEO: Replacement Long Block Engines

Don’t settle for “almost” - it matters where the engine is manufactured or remanufactured. Sponsored by ACDelco.

When you need to source a replacement engine for a GM vehicle, you don’t want to take any chances – because your reputation is on the line. You need to have confidence the replacement engine was assembled using the same procedures and high-quality parts as the original.

GM Genuine Parts OE engines for Chevrolet, Buick, GMC, and Cadillac vehicles are made to the same exacting standards as the original engines. You can also find OE engines for Saturn, HUMMER, Pontiac, and Oldsmobile vehicles. Depending on the application, you can purchase either a remanufactured or new engine.

GM Genuine Parts engines are precision machined to OE specifications. Many internal components are replaced with new parts that meet the exact specifications as the original. This is important for modern GM engines with multiple timing chains, variable valve timing components and displacement-on-demand lifters.

Don’t settle for “almost” – it matters where the engine is manufactured or remanufactured. GM Genuine Parts OE replacement engines are manufactured at partner facilities that follow practices set forth by GM. Before each engine is shipped, it is thoroughly tested to meet GM’s OE Standards.

Engines come with a 36 month/100,000-mile limited warranty. When selecting a replacement engine for a customer, you need to be certain that the engine you are installing will not leave the customer stranded or your shop doing the same job twice. With GM Genuine Parts engines, that confidence is built in.

For more information, visit gmgeniunepart.com.

This video is sponsored by ACDelco.

You May Also Like

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

If you are servicing the brakes or suspension system on a Tesla Model S, you do not need fancy orange gloves or insulated tools. The brake system on the vehicle uses the 12-volt electrical system and not the 400-volt electrical system. Still, it is always a good practice to disconnect the 12-volt power system if you must remove a caliper or replace a brake hose.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.

PRT Heavy Duty Highlights Shocks for CV Applications

Learn to install PRT Heavy Duty’s gas-charged shocks for enhanced driving stability in trucks and buses.

Why You Should Replace The Thermostat

It is always best practice to replace the thermostat on a vehicle after it has overheated. Sponsored by Auto Value and Bumper to Bumper.

The Importance of Volunteering in the Aftermarket with Jon Owens

Owens describes what he’s learned from volunteering in the industry and his vision for AACF as its current president.

Other Posts

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Diesel Air Filter Replacement

Here are some diesel air filter replacement tips in order to keep these vehicles running as intended.

Deciphering Engine Misfire Codes

When the fuel/air mixture ignites, many factors must be met to pass a misfire monitor.

Tensioner Tech Assist

The Lift and Pin is designed to simplify tensioner replacement and belt installation. This video is sponsored by Litens.