Service Opportunities Still Exist With EVs

Service Opportunities Still Exist With EVs

Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.

CC:

According to a recent survey of shop owners, less than a third of shops work on EVs, due to concerns about battery packs, inverters or other daunting technology. The good news is, though, tomorrow’s electric and hybrid vehicles still offer substantial service opportunities under the car.

Just as with conventional internal combustion engine or ICE vehicles, EVs are subject to the same traffic conditions, potholes, curbs and corrosive environments that can accelerate wear and tear on steering and suspension components. But there are also several other factors with EVs that can make life harder for the suspension.

It is critical to use high-quality parts for electric vehicles for three reasons. First, an EV likely weighs more than its ICE equivalent. The electric motor can generate more torque instantly than a conventional gasoline or diesel engine. And without an internal combustion engine, there’s little to mask noise, such as creaks and knocks, coming from the suspension .

Though it may seem like the least dramatic point, noise is probably one of the top reasons people bring their vehicles into your shop. Engine and exhaust sounds can help to mask noise from the suspension, driveline and brakes. With an EV, suspension clunks are immediately noticeable.

Weight matters too.  A Tesla Model X has a curb weight of more than 5,000 lbs., but can increase if the owner selects the extended-range battery and dual motor options. These options can make the Model X weigh more than a Ford F-250. Even beefier, the new Hummer EV weighs in at more than 9,000 lbs. This weight, combined with increased loading forces, can cause accelerated failure of some EV parts if not engineered to take real world conditions into account.

An electric motor can have more power than a gasoline engine. The torque from a 2023 Audi Q4 EV is almost equal to a Ford Mustang with the 5.0L V8. If that is not impressive enough, the Q4 doesn’t have to reach 3,000 rpm for peak torque. The torque delivery from the electric motor is almost instant.

Service conditions, weight and power can directly impact the longevity and performance of a suspension component. Taking a chance on an economy part or the original part from the dealer can often result in similar failure mode. Better options are available from the aftermarket – and leading aftermarket manufacturers take these factors into account when producing parts designed to surpass the original factory parts.

One example of these improvements can be seen in the Mevotech Supreme front upper control arms for the new Ford F-150 Lightning. Instead of using the original hollow stamped steel, the control arm body is a one-piece solid forging. This adds strength to the arm and reduces the stress on other parts such as the ball joint and bushings. These upgrades help address the above challenges which EV vehicles present.

For the Technician, in some cases, getting the specialty hardware required for EVs from the dealer can present a challenge. As an example, Tesla uses a special wedge washer on the Model S front lower control arms. This washer is used to prevent backing off of the nut and must be replaced when installing a new control arm. Another example is when performing a front lower rearward control arm service on the Model S, the battery pack interferes with removal of the frame bolt. In this case, to avoid dropping the battery pack, which is time-consuming and costly, the frame bolt may instead be cut.

Mevotech front lower control arms for Tesla Model S include a full replacement hardware kit, including washers and bolts, to make installation easier and faster for the Technician, while providing more value in a repair option.

Although some may consider Tesla as the premier EV, it’s important to point out that other manufacturers are also producing electric and hybrid electric models (HEVs). There are other types of engineered steering and suspension part improvements for these vehicles made by the aftermarket. This can include utilizing sintered metal bearings which hold up better under high heat and high loads, filling-in rubber bushing voids to better resist tearing and enhanced forging profiles which help improve assembly strength.

What do you need to work on EVs? The answer is not much. Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures, including understanding how to lift the vehicle safely.

Most of all it takes confidence in your supplier’s components and your abilities to install them.

Thanks for watching.

This video is sponsored by The Group Training Academy.

You May Also Like

Eaton to Supply ELocker Differential System to EV Manufacturer

The system leverages an electric motor to power the rear wheels and an electric motor or an optional ICE driving the front wheels.

Intelligent power management company Eaton announced it has been selected by a leading manufacturer of electrified vehicles to "supply a unique ELocker differential system for use on a new plug-in electric hybrid (PHEV) SUV."

Unlike traditional PHEVs, which use an electric motor and internal combustion engine to power all the drive wheels, the new model leverages an electric motor to power the rear wheels and an electric motor or an optional internal combustion engine (ICE) driving the front wheels, the company said.

Replacing Your Power Steering Reservoir

Discover why simply flushing out contaminants from power steering reservoirs may not be sufficient to prevent potential failures.

Planning for Your Shop’s Success In The Future

Understanding succession planning before you need it is critical. This series is presented by Standard.

The Autel IA900

Take an in-depth look at the Autel IA900 Alignment and ADAS calibration frame solution.

Troubleshooting Remote Keyless Entry and Vehicle Starting Issues

Learn how key rings, RFID chips, and other factors can affect your vehicle’s security system and learn to resolve these problems.

Other Posts

Eli Opens Reservations for its Micro-EV in the US

The new Eli ZERO represents a new category of high-tech, efficient and sustainable micro-EVs, according to Eli Electric Vehicles.

EVgo Recognized With 1st Place Leadership Award

The Los Angeles Dept. of Water & Power honored EVgo for its commitment to transportation electrification.

Choosing the Right Power Steering Fluid

Learn what power steering fluid is, why it’s crucial for your customers vehicle, and how to choose the right type.

Toyota Explores Lithium-Ion Battery Recycling

The joint research project seeks to utilize a new process for recovering critical battery materials.