New Fuel Pump Assembly Packaging from Spectra Premium – UnderhoodService

New Fuel Pump Assembly Packaging from Spectra Premium

Spectra Premium has unveiled new fuel pump assembly packaging, which the company says features more rigid internal protection and offers up to 32 percent in shelf space savings.

Spectra Premium has unveiled new fuel pump assembly packaging, which the company says features more rigid internal protection and offers up to 32 percent in shelf space savings.

Packaging will include an inflated bubble insert with vertical air chambers for added protection and an opening flap for ease of access to the part. The float arm has been removed to prevent damage during transport and trilingual work instructions have been included to ensure ease of installation, Spectra Premium says.

This new packaging is applicable to all high-volume models. Additional products will be migrated into the new packaging style as a running change, the company adds.

You May Also Like

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

In the 1960s, coolant was changed twice a year. In the fall, antifreeze with ethylene glycol-based coolant was put into the engine to prevent the coolant from freezing and cracking the block when a cold front hit. Often, if the engine got hot, the antifreeze would boil off. In the spring, the engine would be drained and filled with water and maybe a small can of an anti-corrosion treatment.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Other Posts

High Pressure Direct Injection Fuel Systems

The main destroyer of high-pressure fuel pumps is a lack of oil changes.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

Subaru EJ25 Head Gasket Problems

Most of the EJ head gasket failures occur around the 100,000-mile mark and start as a slow oil or coolant leak.