DTC P0116 Hyundai Cold Engine

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Underhood Service Logo
Technical resources to help diagnose and repair engine-related service issues.
Engine

Cold Engine Stumble/DTC P0116/MIL ON

Underhood Service Staff Writers
By Underhood Service Staff Writers
Published:

Some 2000-2002 Hyundai Accents with 1.5L SOHC and 1.6L DOHC engines may experience the following symptoms in hot and humid weather:

Related Articles

  • Slower than usual acceleration after an initial cold start (engine is cold soaked).

  • Greater than usual rpm drop when engaging drive or reverse (on ATM-equipped vehicles) after an initial cold start.

    Some 2002 1.6L Accents may turn on the Check Engine light and store diagnostic trouble code P0116 (Engine Coolant Temperature Sensor Range/ Performance Problem) in the ECM. This code can be falsely set under certain driving conditions. Check the Engine Coolant Temperature (ECT) sensor to make sure that it’s functioning properly. When the engine is cold soaked, the ECT and intake air temperature should read approximately the same temperature. When the engine is fully warmed-up, the ECT should read about 190

    You May Also Like

    Engine

    Lifter Deactivation

    The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

    Andrew Markel
    By Andrew Markel
    Andrew Markel is the director of content for Underhood Service magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers.
    Published:

    The basic function of a valve lifter is pretty simple. It sits on the camshaft and transfers the motions of the cam lobe up through the pushrods and rockers to open and close the valves. The size and shape of the cam lobe under the lifter (multiplied by the ratio of the rocker arms) determine valve lift and duration. As such, the lifter just follows the motions of the cam. But, it does play a role in valvetrain lash (clearance) and noise.

    Read Full Article

    More Engine Posts
    Alternator Testing For No Charge Conditions

    Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

    By Andrew Markel
    Understanding Coolants

    All-season coolant used inorganic acid technology and worked great for almost 30 years.

    By Andrew Markel
    Ignition System Do’s and Don’ts

    Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

    By Andrew Markel
    Tools To Service Serpentine Belts

    Servicing the serpentine belt on some vehicles is a tough task.

    By Andrew Markel

    Other Posts

    Battery Charging and Diagnostics

    Here are six tips to use when diagnosing a vehicle with a dead battery. 

    By Andrew Markel
    Why Do Timing Chains Stretch?

    As the timing chain wears, it can change the timing of the camshaft and crankshaft.

    By Andrew Markel
    Carbon Deposits and Direct Injection Engines

    The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

    By Underhood Service Staff Writers
    Acura Turbo Engine Service

    It is important to check the operation of the solenoids that control vacuum to the actuators.

    By Andrew Markel