DOE Puts $48M Toward Improving America’s Power Grid

DOE Puts $48M Toward Improving America’s Power Grid

This effort aims to better control grid power flow to avoid outages, which costs the economy $150 billion annually.

This article is courtesy of The Buzz EV News, by David Sickels.

The U.S. Department of Energy (DOE) has announced another $48 million in funding to improve the reliability and resiliency of the U.S. power grid. This batch of funding will support a new program focused on developing power grid technologies that improve control and protection of the domestic power grid. The agency says outages caused by extreme weather events are estimated to cost the U.S. economy $150 billion annually. This new effort by DOE will fund projects that aim to enable utilities to more effectively control grid power flow to avoid disturbances, and quickly isolate and route around disruptions.

Managed by DOE’s Advanced Research Projects Agency-Energy (ARPA-E), the “Unlocking Lasting Transformative Resiliency Advances by Faster Actuation of power Semiconductor Technologies” (ULTRAFAST)” program will support the development of faster, more capable power electronics for enhanced resiliency, reliability, and control of power flow at all grid interfaces, the DOE says. Successful ULTRAFAST project teams will develop device concepts that target: 

  • Semiconductor material, device and/or power module level advances to enable faster switching and/or triggering at higher current and voltage levels
  • Improved electromagnetic interference immunity 
  • Complementary sensing, packaging, and thermal management technology 

ARPA-E first held a workshop on this topic last year. Workshop participants provided expert inputs on the technical aspects of ultra-fast-triggered semiconductors, and how such devices can aid national goals to develop future high-performance resilient power systems.

You May Also Like

FLO, GM Activate Plug and Charge for GM EV Drivers in Canada

FLO’s technology confirms identification, authorizes the charging session and activates billing without any additional action from the driver.

FLO and General Motors activated the Plug and Charge capability at all DC fast chargers on the FLO network across Canada. All GM EV drivers are provided with access to GM’s Plug and Charge, which is enabled by FLO’s autocharge software. The feature allows GM EV drivers to begin a fast-charging session by plugging in their vehicle at one of FLO’s fast charging stations across Canada, the company said.

Why A 12-volt Battery is Still Essential in EVs

A device similar to an alternator, called a DC-DC converter, charges the 12-volt battery from the high-voltage battery pack.

Elywhere Launches in North America

Elywhere said its chargers can be configured to support power in the 1 MW range, providing solutions for electric fleets.

Demand for REE Automotive Full By-Wire EVs Continues to Grow

REE has expanded its authorized dealer network, which now covers 66 locations of sales and service across the U.S. and Canada.

New Orleans RTA Selects New Flyer Electric Hybrid Buses

The New Flyer buses will be equipped with the Allison eGen Flex electric hybrid propulsion system.

Other Posts

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

Mullen Road Tests Solid-State Polymer Battery Pack

The results met or exceeded all requirements targeted for the first drive cycles for energy usage and driving range.

TurnOnGreen, Endliss Power Team up

TurnOnGreen said it will leverage EPI’s expertise in administering and executing power purchase agreements with commercial clients.