Turbocharger Overview and Common Weak Points (VIDEO)

Turbocharger Overview and Common Weak Points (VIDEO)

How does a turbocharger work? Let's talk about it in simple terms. This video is sponsored by Standard Motor Products.

CC:

Turbocharged gasoline engines continue to grow in popularity and it’s happened quickly. According to the Department of Energy, approximately 1% of all 2000 model year light-duty vehicles were turbocharged. Fast-forward to today, and over one-third of all light-duty vehicles are now turbocharged. So why the rapid change? Fuel economy standards. Current cafe standards call for automakers to increase the average fuel economy of their lineups to 54.5 miles per gallon by 2025. Turbocharging is just one method being used to boost the fuel economy in modern vehicles. It allows them to build engines which produce more power with less displacement and sometimes with fewer cylinders.

How does a turbocharger work? Let’s talk about it in simple terms. Gasoline engines burn a mixture of air and fuel. The engine can only draw in a fixed amount of air on its own, so the ECU controls the amount of fuel added to the combustion chamber to maintain that optimum air and fuel mixture. Turbochargers can increase the air flow into the engine. This means more fuel can be added, and the engine can make more power.

Inside the turbocharger, you’ll see a shaft with a turbine wheel on one end and a compressor wheel on the other. The turbine is driven by exhaust gases leaving the engine. This spins the compressor wheel, which forces more air into the intake manifold. This increased air flow and pressure is known as boost or charge air. The charge air typically passes through an inner cooler or heat exchanger. This helps to remove some of the heat and makes the air denser. The air then travels to the combustion chamber.

Turbochargers rely heavily on one under-hood fluid, engine oil. Engine oil is critical for the bearings inside the turbocharger. Without proper lubrication, these bearings simply will not last. Some turbos will also have engine coolant circulated through the turbocharger to help keep temperatures in check. Restricted flow of either of these fluids can very quickly lead to failure.

The most common customer concern would likely be whistling noises coming from the engine bay, along with reduced engine power. These are typically indicators of charge air leaking from a connection somewhere in the system. A smoke machine can be used to help you find the source of a leak. Other signs of a failed turbo include reduced engine power and reduced fuel economy.

Some turbos operate at temperatures in excess of 1700 degrees and can spin at 150,000 RPM to 200,000 RPM. So the components used inside a turbo charger matter. The rotating journal and thrust bearings used in Standard turbochargers are 100% quality tested. In fact, every Standard turbocharger is end-of-line tested throughout the full RPM range. When you install a Standard turbocharger, you can be confident that you are installing a part which has been tested and will perform for both you and your customer.

Best of all, Standard turbocharger kits include the gaskets and hardware needed for a complete turbo repair. Standard’s turbo program also includes related components like the actuators, turbo boost sensors and solenoids, wastegate solenoids, bypass valves, speed sensors, turbo coolant lines, oil drain tube, and oil lines, as well as charge air coolers. I’m Brian Sexton. Thanks for watching.

This video is sponsored by Standard Motor Products.

You May Also Like

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

If you are servicing the brakes or suspension system on a Tesla Model S, you do not need fancy orange gloves or insulated tools. The brake system on the vehicle uses the 12-volt electrical system and not the 400-volt electrical system. Still, it is always a good practice to disconnect the 12-volt power system if you must remove a caliper or replace a brake hose.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.

PRT Heavy Duty Highlights Shocks for CV Applications

Learn to install PRT Heavy Duty’s gas-charged shocks for enhanced driving stability in trucks and buses.

Why You Should Replace The Thermostat

It is always best practice to replace the thermostat on a vehicle after it has overheated. Sponsored by Auto Value and Bumper to Bumper.

The Importance of Volunteering in the Aftermarket with Jon Owens

Owens describes what he’s learned from volunteering in the industry and his vision for AACF as its current president.

Other Posts

Tensioner Tech Assist

The Lift and Pin is designed to simplify tensioner replacement and belt installation. This video is sponsored by Litens.

EV Cooling Systems

The large batteries that EVs carry need to be maintained within a specific temperature range for optimal performance.

Decoding Brake Pull Issues

Addressing brake pulls requires diagnostic dedication. This video is part of the Group Training Academy.

What Constitutes A Complete Brake Job?

Complete, safe brake jobs are key. This video is part of the Group Training Academy.