Pulstar gg1 Pulse Plug Demonstrates Horsepower Increase In Jeep 3.6L Engine Applications – UnderhoodService

Pulstar gg1 Pulse Plug Demonstrates Horsepower Increase In Jeep 3.6L Engine Applications

The Pulstar gg1 Pulse Plug for Jeep vehicles that utilize the Chrysler Pentstar 3.6L engine have shown an increase of six horsepower (HP) over stock plugs in dyno testing conducted by Enerpulse Inc. In addition, the testing demonstrated a fuel economy increase of 4.26 percent, said the company.

The Pulstar gg1 Pulse Plug for Jeep vehicles that utilize the Chrysler Pentstar 3.6L engine have shown an increase of six horsepower (HP) over stock plugs in dyno testing conducted by Enerpulse Inc. In addition, the testing demonstrated a fuel economy increase of 4.26 percent, said the company.

The Pulstar gg1 Pulse Plug fits the V6 engine applications for the 2011 to present Jeep Grand Cherokee in the following models: Laredo "E," Laredo "X," 70th Anniversary Edition, Trailhawk, Altitude Edition, Limited, Overland and Overland Summit Edition.

It also has fitment for the 2012 to present Jeep Wrangler in the following models: Sport, Unlimited Sport, Sport "S," Unlimited Sport "S," Freedom Edition, Unlimited Freedom Edition, Altitude Edition, Unlimited Altitude Edition, 70th Anniversary Edition, Unlimited 70th Anniversary Edition, Sahara, Unlimited Sahara, Moab, Unlimited Moab, Rubicon, Unlimited Rubicon, Rubicon 10th Anniversary and Unlimited Rubicon 10th Anniversary.

Pulstar Pulse Plugs are installed on all touring Jeeps used by the popular “Pink Jeep Tours” of Sedona, Ariz. Pink Jeep Tours has been scrambling up and over Sedona’s magnificent Red Rock outback for over 50 years. Started as an impulse by a cornet player from California to entertain friends and sell some land, Pink Jeep Tours has become the unforgettable, you-gotta-do-it thrill of any Sedona visit.

Today, Pink Jeep Tours is the granddaddy of off-road touring and the longest running adventure company in the country. For more information, visit www.pinkjeeptours.com/sedona.

According to the company, Pulstar Pulse Plugs look like a spark plug on the outside, but a unique capacitor-based circuit inside captures energy normally wasted by spark plugs and generates a spark with 20,000 times greater energy. For more information, phone 888-800-6700 or visit www.pulstar.com.

 

You May Also Like

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

The basic function of a valve lifter is pretty simple. It sits on the camshaft and transfers the motions of the cam lobe up through the pushrods and rockers to open and close the valves. The size and shape of the cam lobe under the lifter (multiplied by the ratio of the rocker arms) determine valve lift and duration. As such, the lifter just follows the motions of the cam. But, it does play a role in valvetrain lash (clearance) and noise.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Other Posts

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.