MAHLE Clevite Introduces More Than 60 New Part Numbers in March – UnderhoodService

MAHLE Clevite Introduces More Than 60 New Part Numbers in March

MAHLE Clevite Inc. says it introduced more than 60 new part numbers in March for various types of bearings, cylinder components, filters, gaskets, piston rings and turbochargers. The new part numbers are available for a range of light vehicle and heavy-duty applications.

MAHLE Clevite Inc. says it introduced more than 60 new part numbers in March for various types of bearings, cylinder components, filters, gaskets, piston rings and turbochargers. The new part numbers are available for a range of light vehicle and heavy-duty applications.

New part numbers are now available for the following products: Auxiliary cam bearing sets, balance shaft bearing sets, camshaft bearings, connecting rod bearings, crankshaft main bearing sets and thrust washer sets, pistons, piston skirts and piston ring sets, O-ring sets, rebore kits, air filters, fuel filters, engine camshaft plugs, conversion gasket sets, coolant outlet gaskets, engine head bolt and gasket sets, engine intake manifold gasket sets, oil pan gasket sets, timeline cover gasket sets, value cover gasket sets, valve stem seal sets, water pump gaskets, exhaust manifold gasket sets, fuel injection plenum gaskets and throttle body mounting gaskets, in-frame overhaul sets, turbochargers and turbocharger gaskets and mounting gasket sets.

“In March, we introduced a total of 64 new part numbers for various light vehicle and heavy-duty applications,” said David Garmenn, product development manager, MAHLE Clevite Inc. “We’re introducing new product numbers every month to further increase our already extensive product offering. The addition of these new part numbers shows our continued commitment to meeting the needs of our customers.”

For a complete listing of new part numbers, visit www.mahle-aftermarket.com.

You May Also Like

It’s Got Spark!

Why can’t you trust some spark tests?

You have probably seen some reality TV shows where the “builder” will pull a spark plug wire to confirm they have spark. This is one of the most misleading tests for the ignition system. If the spark plug produces a spark, the spark is at 14.6 psi (normal air pressure at sea level), not 170 psi or more inside the cylinder during the top of the power stroke.

Diagnosing Intercooler Boost Trouble Code P0299

The criteria for setting the code is very basic.

Honda Electronic Throttle Body Service Tips

Using care and following OEM procedures will help you to avoid unnecessary parts replacement and comebacks.

Why Alternators Are Subject To Ripple Voltage

The alternator produces an AC current that must be converted into DC current by way of a rectifier.

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Other Posts

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.