MAHLE Clevite Introduces 95 New Part Numbers In October – UnderhoodService

MAHLE Clevite Introduces 95 New Part Numbers In October

MAHLE Clevite introduced 95 new part numbers in October for various types of bearings, cylinder components, filters, gaskets, engine timing products and piston rings, as well as new turbocharger part numbers. The part numbers are available for a range of light vehicle and heavy-duty applications.

MAHLE Clevite introduced 95 new part numbers in October for various types of bearings, cylinder components, filters, gaskets, engine timing products and piston rings, as well as new turbocharger part numbers. The part numbers are available for a range of light vehicle and heavy-duty applications.

New part numbers are now available for the following products: engine camshaft bearing sets, connecting rod bearings, crankshaft main bearing sets, engine pistons, cylinder sleeves and sleeve assemblies, piston ring sets, air filters, oil filters, fuel filters and cabin air filters, conversion gasket sets, cylinder head gasket sets, intake manifold gasket sets, oil pan gasket sets, valve cover gasket sets, water pump gaskets, exhaust manifold gasket sets, fuel injection plenum gaskets, O-ring kits and throttle body mounting gaskets, turbochargers and turbocharger service kits.

“October was a huge month for us with the introduction of 95 new part numbers for light vehicle and heavy-duty applications,” said Matthias Stegmueller, product development manager, MAHLE Clevite Inc. “A larger number of new products this month were in the MAHLE Original filtration category – air, oil, fuel and cabin air filters. Additional information on filters can be found on our newly-launched MAHLE Original filter-specific website."

For a complete listing of new part numbers introduced in October, visit www.mahle-aftermarket.com or contact your MAHLE Clevite Account Manager.

You May Also Like

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

In the 1960s, coolant was changed twice a year. In the fall, antifreeze with ethylene glycol-based coolant was put into the engine to prevent the coolant from freezing and cracking the block when a cold front hit. Often, if the engine got hot, the antifreeze would boil off. In the spring, the engine would be drained and filled with water and maybe a small can of an anti-corrosion treatment.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Other Posts

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

Subaru EJ25 Head Gasket Problems

Most of the EJ head gasket failures occur around the 100,000-mile mark and start as a slow oil or coolant leak.

New Oil Specifications

Many 0W16 oils have a new donut certification mark on the bottle called API SN-PLUS and SN-PLUS Resource Conserving.