Thieves Steal 500-lb. Engine from Parts Store – UnderhoodService

Thieves Steal 500-lb. Engine from Parts Store

Thieves broke into Benning Auto Parts in Columbus, GA, and stole a 500-lb. performance racing engine. After getting his business' broken front door fixed, store owner Roy Parks said that he is going to look into various options to protect his business.

Thieves broke into Benning Auto Parts in Columbus, GA, and stole a 500-lb. performance racing engine. After getting his business’ broken front door fixed, store owner Roy Parks said that he is going to look into various options to protect his business.

Below is the article as it appeared on the WLTZ – NBC 38 website.

Business Owner Speaks Out After Engine Is Stolen From Parts Shop

By Olivia Laborde
Story Created: Jun 16, 2010 at 10:39 AM CDT

Police say burglars broke into Benning Auto Parts on 17th Street this morning and got away with a 500 lbs engine. The owner of the shop says this isn’t the first time, but now he’s taking steps to make sure it doesn’t happen again.

"We’ve had this problem for a month, We’ve had several break-ins" Roy Parks owns Benning Auto Parts. He says this morning’s break in is the 6th in just a couple of years. But Parks says, this one’s different.

Parks says, "Somebody had broke in our front door and loaded up an engine and hauled it off. We figured it would take at least two or three people. It’s not something you can put in the trunk of your car. "

That’s because the engine weighed about 500 lbs, the average size. But this wasn’t just any engine; it’s used for performance vehicles.

Parks explains, "Really the only use for it is if someone wanted to use it as a racecar in a dragstrip.”

To read the entire article, visit the WLTZ – NBC 38 website at http://www.wltz.com/news/local/96477189.html.

You May Also Like

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

The basic function of a valve lifter is pretty simple. It sits on the camshaft and transfers the motions of the cam lobe up through the pushrods and rockers to open and close the valves. The size and shape of the cam lobe under the lifter (multiplied by the ratio of the rocker arms) determine valve lift and duration. As such, the lifter just follows the motions of the cam. But, it does play a role in valvetrain lash (clearance) and noise.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Other Posts

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.