Chrysler Steering System 

Chrysler Steering System 

If one or more conditions from the list are confirmed to be present, refer to the detailed service procedures.

Steering Inspection After a Collision 

MODELS

2011 – Current FCA Group Vehicles 

 If the vehicle is involved in a collision where the airbag has been deployed or the steering wheel is visually deformed, then steering column replacement is required. Internal component damage from such an event may not be visible; however, steering column replacement is required. A repair facility must check for the conditions listed below before returning the vehicle to the customer. If one or more conditions from the list below are confirmed to be present, Refer to the detailed service procedures available in the service information.

  • Steering wheel is off center. 
  • Vehicle pulls left or right. 
  • Perceived column/steering wheel free play. 
  • Steering wheel has fore and aft looseness. 
  • Perceived dash, vehicle, steering wheel vibration by driver. 
  • Difficult steering in either or both directions. 
  • Steering catches/sticks. 
  • Steering wheel does not return to center position. 
  • Excessive road feedback. 
  • Noise or vibration such as a rattle, excessive clunk, popping, squeaking, rubbing, scrubbing or knocking.

You May Also Like

GM No Crank/Start and Key Fob Range Problems

2007-2023 GM vehicles use Radio Frequency (RF) to transmit information.

Ford 2.0L EcoBoost Rattle Noise

To correct the condition, follow the Service Procedure to replace the flexplate, transmission fluid pump & torque converter.

Beating the Tech Shortage Through Mentoring

How understanding the 80/20 Rule and creative mentoring can make the shortage less threatening.

GM Diagnostic Tip on Misfires, Noises and DTCs

Determine which description best matches the vehicle you are working on, and perform the suggestions as necessary.

Inside the Scan Tool

A look at the internal and external components that affect performance and durability.

Other Posts

Chrysler’s Totally Integrated Power Module

The TIPM is on the CAN bus, any issues with the communication between the ECM, ABS and BCM can cause problems with the TIPM.

Modern Vehicles Need Precious Metals 

Modern ignition systems require dual precious metal spark plugs capable of supplying the highest voltage outputs to date

Taking the Fear out of ASE Testing

Spring registration now open; Register by June 30.

Inspection Intervals

If you fail to inspect an item on the schedule, you could miss out on maintenance opportunities.