AutoEnginuity Releases Giotto Scan Tool Version 15.3 – UnderhoodService

AutoEnginuity Releases Giotto Scan Tool Version 15.3


AutoEnginuity, LLC has announced the worldwide release of the Giotto scan tool (Version 15.3) for the Windows platform.

Giotto 15.3 introduces a leap forward in coverage for Jaguar, Land Rover and Porsche, said the company.

Important features include:

Jaguar

  • Added DTC Odometer readings
  • Added Headlamp Control Module B full system support
  • Added Driver Door and Passenger Door Module system test Calibrate Window Glass
  • Added Driver Seat Module system test Seat Normalization
  • Added Gateway Module (GWM) system test Register Battery
  • Added Rear Tailgate Module (RTM) system test Tailgate / Trunk Calibration
  • Added Ride Level Control Module (RLCM) system tests Inflation Showroom, Compressor Replacement, Inflation, Deflation
  • Improved XF TCM system support by adding missing adaptive sensors

 

Land Rover

  • Added DTC Odometer readings
  • Added ABS Control Module system tests: Lateral Sensor Calibration, Long Sensor Calibration, Roll Rate Sensor Calibration, Pressure Sensor Calibration, Steering Angle Sensor Calibration
  • Added AWD Control Module system tests: AWD Calibration, Pump Venting
  • Added Driver Door and Passenger Door Module system test Calibrate Window Glass
  • Added Driver Seat Module system test Seat Normalization
  • Added Gateway Module (GWM) system test Register Battery
  • Added Headlamp Control Module Headlamp Control Module Calibration system test
  • Added HVAC Module Actuator End Stop Detection and Reset Compressor Protection system tests
  • Added Rear Tailgate Module (RTM) system test Tailgate / Trunk Calibration
  • Added Ride Level Control Module (RLCM) system tests Inflation Showroom, Compressor Replacement, Inflation, Deflation
  • Added Running Board Module (RBM) system test Service Mode Enable / Disable
  • Added Parking Brake Control Module full system support (Including system tests: Long. Sensor Calibration, Activation, Brake Pad Replacement, and Exit Maintenance Mode)
  • Added PCM actuations
  • Added BCM system tests: Battery Replacement, Ignition Counter Reset, Rain Sensor Calibration, Reset Adaptive Values After Clear Reset, roof Blind Calibration, Steering Column Calibration, Sunroof Calibration, Transport Mode Disabled and Valet Mode
  • Added PCM Diesel system tests: Reset PCM Adaption, Service Interval Reset, Fuel Prime, Diesel Exhaust Fluid Pump Replacement, Diesel Exhaust Fluid Sensor Tank Level, Diesel Fuel Adaption ReInitialization, Oxidation Catalyst, Oxygen Sensor, Reset Exhaust Valve Adaption, Reset Low Pressure EGR Adaptions, Reset Mass Air Flow Adaption, Reset Particulate Filter, Reset SCR Quality Filter, Reset SCR Start Inhibit, Turbine Shut-Off Valve Replacement, Throttle Valve Actuation Replacement and Water In Fuel Detection

 

Porsche

  • Added Cayenne GTS, Cayenne Hybrid, Macan GTS and Macan Turbo model support
  • Added enhanced support for 911 2012-’16, 911 Turbo 2013-’16, Cayenne 2010-’16, Macan 2013-’16
  • Added DTC Fault Frequency and Odometer readings for UDS-based modules

 

For further details about Giotto products, visit autoenginuity.com or email [email protected].

You May Also Like

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment.

Management and operations of the privately owned company are unchanged. 

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to your study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Bendix Releases Technical Materials for ADAS Support

They are designed to help technicians properly set up, inspect, and diagnose several components integrated with ADAS.

Dayco Adds Almost 30 Part Numbers in March

The 29 new part numbers will be available by the end of March for distributors interested in adding to their product coverage.

Other Posts

ASE Designates June as Automotive Service Professionals Month

ASE urges industry members to embrace Automotive Service Professionals Month as a platform for expressing gratitude.

ZF Aftermarket Releases 80 New Parts

The latest additions expand coverage to more than 5 million vehicles in operation.

Vehlo Acquires Shop Management Software, Shop-Ware

Shop-Ware is a cloud-based shop management platform catering to independent automotive aftermarket repair shops.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.