Spectra Premium Introduces 69 New SKUs – UnderhoodService

Spectra Premium Introduces 69 New SKUs

Spectra Premium has announced the release of 69 new SKUs.

These new parts cover more than 18 million vehicles on the road today. Coverage includes fuel tanks, straps, filler necks and fuel modules, for popular late-model domestic and import applications. New products include:

• 26 fuel pump assemblies for 2011-’12 Ford F-Series 6.7L Diesel (SP2477M); 2003-’05 Hyundai XG350 (SP3062H); and 1999-’03 Mazda Protégé (SP4067M)

• Four tank filler necks for popular models such as 2009-’12 Chevrolet Traverse, GMC Acadia (FN946); and 04-11 Nissan Titan (FN943)

• Seven fuel tank straps for late-model domestic and import applications, such as 2010-’13 Chevrolet Equinox, GMC Terrain (ST396); 2005-’12 Nissan Frontier, Pathfinder, Xterra (ST418); and 2009-’12 Ford F-Series (ST434).

• Three Spectra Ford fuel tanks, covering 2004-’10 E-Series vans (F41C/F41D) and 2003-’07 Focus (F88A)

• Three condensers for late-model imports: 2012-’14 Honda Civic
(7-3976); 2013-’14 Dodge Dart (7-4192); and 2012-’13 Infiniti M35h (7-4279)

• Five heater cores for popular imports and heavy-duty trucks, including one model for 2006-’10 Infiniti M35/M45 (98047)

• A Spectra oil pan for 2010-’12 Subaru Legacy and Outback (SUP03A)

For a complete PDF list of new products from Spectra Premium, click here.

You May Also Like

What Causes Direct Fuel Injectors To Clog?

In the case of a direct fuel injector where the tip is exposed to the combustion event, carbon can stick to the nozzle and cause a bad spray pattern, because carbon searches for other carbon.

In the U.S., the quality of the fuel we put into our vehicles is very high. By the time it travels through the fill neck, it has been filtered twice at the station. Before it gets to the fuel rail, it has been filtered by a sock in the tank and a filter under the car. So why do direct and port fuel injectors still become clogged or have spray pattern problems? The answer involves a little bit of chemistry and a lot of heat.

BMW Dual-Clutch Transmission Diagnostics

A DCT transmission uses the gearing principles of a manual transmission.

Simple Engine Fasteners Actually Complex Engineering Systems

Fasteners act much the same as a spring due to the physics of stretch and rebound.

Runners And Ports: How Modern Engines Manage Air

Variable-length intake runners change the length of the intake passages depending on engine speed and load.

Driveshaft Universal Joint Tips And Techniques

Before removing the driveshaft, check for play in the yoke and slip joint. If the u-joints are failing, you should be able to see movement in the shaft as you apply leverage.

Other Posts

VIDEO: Best Practices For Turbocharger Life

Doug Kaufman discusses some simple things your customers can do to ensure the longest life of their turbochargers. Sponsored by MAHLE.

Fuel: It’s The Tank, Not The Pump

One of the most basic procedures when replacing a fuel pump – and often the most overlooked – is inspecting the fuel tank.

VIDEO: Where Have The Fuel Pump Filters Gone?

Andrew Markel discusses how to diagnose a fuel pump, and the importance of replacing the entire module if the pump is failing. Sponsored by Auto Value and Bumper to Bumper.

The Next Evolution Of Fuel Injection

You may soon see a vehicle that has both direct fuel injection and port fuel injection. It could be a Toyota, Ford or other make. It can be confusing because for a long time we were told that direct fuel injection was better than port fuel injection. To get the best power and economy from an engine, some engineers realized that both injection systems could be used on the same engine.