ZF Services Added 49 New Part Numbers To Sachs Clutch Line In 2013 – UnderhoodService

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Underhood Service Logo
Technical resources to help diagnose and repair engine-related service issues.
Engine

ZF Services Added 49 New Part Numbers To Sachs Clutch Line In 2013

ZF Services LLC, the strategic aftermarket business unit of ZF Friedrichshafen AG in North America, reports that it added 49 new parts to the Sachs passenger car and light truck clutch product line during the course of 2013.

Underhood Service Staff Writers
By Underhood Service Staff Writers
Published:

Related Articles

ZF Services LLC, the strategic aftermarket business unit of ZF Friedrichshafen AG in North America, reports that it added 49 new parts to the Sachs passenger car and light truck clutch product line during the course of 2013.

The new part numbers added throughout the year included 24 new complete clutch kits, 11 flywheels and 14 hydraulic SKUs. One of the top clutch kits released during the past year fit the 2013-2006 Audi A3 and VW CC, EOS, GTI, Jetta and Passat, according to ZF. Sachs is the OE clutch supplier for these applications.

ZF Services plans to add 75 new parts to the line in 2014. Numbers are announced on a monthly basis and the new number form is uploaded to the ZFSPU page at www.zf.com/us/sachs.

For more information about Sachs clutch components, contact your nearest Sachs authorized distributor, Sachs sales representative or visit www.zf.com/us/sachs.

 

You May Also Like

Engine

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Underhood Service magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers.
Published:

The basic function of a valve lifter is pretty simple. It sits on the camshaft and transfers the motions of the cam lobe up through the pushrods and rockers to open and close the valves. The size and shape of the cam lobe under the lifter (multiplied by the ratio of the rocker arms) determine valve lift and duration. As such, the lifter just follows the motions of the cam. But, it does play a role in valvetrain lash (clearance) and noise.

Read Full Article

More Engine Posts
Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

By Andrew Markel
Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

By Andrew Markel
Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

By Andrew Markel
Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

By Andrew Markel

Other Posts

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

By Andrew Markel
Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

By Andrew Markel
Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

By Underhood Service Staff Writers
Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

By Andrew Markel