How Often Should Fuel Filters Be Replaced? – UnderhoodService

How Often Should Fuel Filters Be Replaced?

Most late-model vehicles have no factory-recommended service for the fuel filter because the filter is a "lifetime" filter part of the fuel pump assembly buried inside the gas tank.

Q: How often should fuel filters be replaced?

A. Most late-model vehicles have no factory-recommended service for the fuel filter because the filter is a “lifetime” filter part of the fuel pump assembly buried inside the gas tank. So the only recommendation is to replace it if it is clogged or the fuel pump is being replaced. New fuel pump modules usually come with a new filter as part of the assembly, but if a customer is replacing the pump separately he should also change the filter and pickup screen.

On vehicles that have inline fuel filters, there may be a recommended service interval (typically 50,000 miles). But if the filter becomes clogged with dirt, rust or sediment from the fuel tank, it may have to be replaced sooner. Frequent fuel filter clogging would tell you the fuel tank is being contaminated with outside dirt, or it is rusting (a steel tank), or is flaking (older plastic tank). The fix here may require cleaning or replacing the fuel tank.

A common symptom of a clogged fuel filter is loss of high-speed power caused by a restriction in fuel flow when engine demand is high. If the filter becomes completely blocked, it will starve the engine for fuel causing the engine to die. Technicians will often cut open a clogged fuel filter to find out what caused it to clog up.

You May Also Like

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

The basic function of a valve lifter is pretty simple. It sits on the camshaft and transfers the motions of the cam lobe up through the pushrods and rockers to open and close the valves. The size and shape of the cam lobe under the lifter (multiplied by the ratio of the rocker arms) determine valve lift and duration. As such, the lifter just follows the motions of the cam. But, it does play a role in valvetrain lash (clearance) and noise.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Other Posts

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.