Tech Tip: Servicing Honda Knock Sensors – UnderhoodService

Tech Tip: Servicing Honda Knock Sensors

If the check engine light is on in a customer's 1998 Honda Accord EX, with trouble code P0325, it could be caused by the knock sensor, the connection, wire harness or the Engine Control Module (ECM). Replace the knock sensor and the trouble code resets.

If the check engine light is on in a customer’s 1998 Honda Accord EX, with trouble code P0325, it could be caused by the knock sensor, the connection, wire harness or the Engine Control Module (ECM). Replace the knock sensor and the trouble code resets.

Tests:
1. With the knock sensor unplugged and using a digital volt ohmmeter (DVOM), check for 0.02V to 0.03V reference voltage from the ECM to the knock sensor.

2. Next use a scope and look for an AC voltage signal from the knock sensor when the engine rpm is increased. It should have a very rapid AC voltage pattern of 1V positive and 1V negative. If the signal is OK, verify that signal is correct back to the ECM. If there is no harness or knock sensor problem, always verify the connection at the ECM before replacing the ECM.

Tech Tips:
The knock sensor harness is a shielded wire, so also unplug the alternator and verify that there is no interference in that circuit.

Courtesy of Identifix.

For more information, visit www.identifix.com.

You May Also Like

Five Tips for your Next Wheel Bearing Job

These practical tips are designed to save you time and frustration, ensuring a smooth, noise-free outcome for your customers.

Replacing wheel bearings can be a challenging task, akin to dental work with its intricate disassembly and stubborn parts. In this video, we share five essential tips to simplify your next wheel bearing job. Discover the correct use of heat to break up corrosion, when to rely on a press, how to ensure proper depth for cartridge bearings, the benefits of turning instead of prying, and the advantages of opting for loaded knuckles. These practical tips are designed to save you time and frustration, ensuring a smooth, noise-free outcome for your customers.

Do EVs Require Special Brake Pads?

Proper brake pad selection is crucial for EVs to ensure consistent stopping power and long pad life.

Power Window Regulator Replacement

Blindly replacing a window regulator and motor assembly may not solve a customer’s problem.

Freeze Frame Diagnostics

Freeze frame data is a “snap shot” of when the code occurs of the specific sensor PIDs.

Amsted Automotive Displays New Ways to Extend EV Range 

Amsted will display a cache of multi-functional clutch technologies with benefits in ICE, EV and HEV platforms at the 24th annual VDI Dritev Congress.

Other Posts

TEXA Announces CAR 76.6.0 Software Release

The software provides free streamlined access without login or authentication required to the Motor TruSpeed platform.

Educate Your Customers Utilizing AI

Discover how to generate quick, accurate explanations for repair orders and estimates, boosting your shop’s credibility and customer trust.

TEXA Runs Car Diagnostic Tool Promotion

The promotion is active from June 1 through August 31.

Bosch Releases 87 New Part Numbers in June

Bosch’s new part numbers cover 318 million vehicles in operation across North America.