Tech Tip: Silencing Dodge Ram’s Growling Noise – UnderhoodService

Tech Tip: Silencing Dodge Ram’s Growling Noise

Noises can sometimes be very difficult to diagnose - especially under the hood and only when the vehicle is in motion. In the case of some 2003 Dodge Ram 1500 2WD pickups equipped with 4.7L and 3.7L V8 engines, a growling or moaning sound may only be heard during heavy acceleration when carrying substantial loads or towing ....

By Rich Diegle
ALLDATA Senior Automotive Editor

Noises can sometimes be very difficult to diagnose — especially under the hood and only when the vehicle is in motion. In the case of some 2003 Dodge Ram 1500 2WD pickups equipped with 4.7L and 3.7L V8 engines, a growling or moaning sound may only be heard during heavy acceleration when carrying substantial loads or towing.

This condition may be cause by the right motor mount contacting the motor mount frame bracket. The noise can be eliminated by installing a rubber isolator between the motor mount and the motor mount bracket.

Diagnosis
Inspect the right engine mount and bracket. If the motor mount is contacting the bracket, there will be witness marks (shiny metal) present on the frame bracket. Perform the Repair Procedure if the witness marks are present.

Repair Procedure
1. Raise the vehicle on a hoist.

2. Place an adjustable jack stand under the engine to support the engine when the motor mount through-bolts are removed.

3. Loosen both motor mount through-bolts. Leave the nut on the left side mount as this bolt will not be removed. Remove the nut on the right side.

4. Raise the engine with the jack stand until the right side through-bolt becomes free. Remove the right side bolt. Raise the engine far enough to clear the frame bracket and allow the isolator pad, (Chrysler P/N 55366020AA) to be inserted.

Insert the isolator on the mount with the Pentastar logo facing the front of the vehicle (see Figure 1).

5. Lower the bracket and align the mount with the frame bracket and push the bolt through the isolator and bracket with the threads at the rear.

6. Install the nut and tighten both through bolts to 115 Nm (85 ft.-lbs.).

7. Remove the jack stand and lower the vehicle.

Written by ALLDATA Senior Automotive Editor, Rich Diegle, an Advanced Engine Performance Certified, ASE Master Technician with an AA Degree in automotive technology and 23 years of dealership and independent shop experience.

Courtesy of ALLDATA.

For additional information on ALLDATA, visit www.alldata.com.

You May Also Like

Supercharger Pros And Cons

Customers generally look to superchargers for the instant throttle response, not fuel economy.

Superchargers are synonymous with making horsepower, especially in drag racing, gaining popularity and recognition as a viable power adder. However, they’re not the best option for saving fuel.

While most automakers are currently fascinated with employing turbochargers to make up for lost horsepower due to lower-displacement engines, do superchargers have a place in the current automotive climate? Indeed, this power-adder is more commonly found in the performance arena, because it produces power at lower rpm and comes in a smaller package than a turbocharger. But there are some downsides.

Continental Releases 67 New Part Numbers

Twenty-two new import part numbers, as well as 39 new pulley and tensioner part numbers, are immediately available.

Standard Motor Products Introduces 268 New Numbers

The release provides new coverage in 75 product categories and 80 part numbers for 2023 and 2024 model-year vehicles, SMP said.

Toyota Explores Lithium-Ion Battery Recycling

The joint research project seeks to utilize a new process for recovering critical battery materials.

Ignition Coil Output

To see inductance inside the primary windings, use an amp probe placed around the positive wire for the ignition coil.

Other Posts

Plastic Timing Chain Guides

Timing chain guides are designed to wear, but the guides are designed to last the engine’s life.

Honda to Establish EV Value Chain in Ontario, Canada

It will strengthen EV supply system and capability with an eye toward a future increase in EV demand in North America, Honda said.

PRT Launches 30 New Complete Strut Assemblies

The new items represent more than 10 million vehicles in new coverage, PRT said.

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.