Pulstar gg1 Pulse Plug Demonstrates Horsepower Increase In Jeep 3.6L Engine Applications – UnderhoodService

Pulstar gg1 Pulse Plug Demonstrates Horsepower Increase In Jeep 3.6L Engine Applications

The Pulstar gg1 Pulse Plug for Jeep vehicles that utilize the Chrysler Pentstar 3.6L engine have shown an increase of six horsepower (HP) over stock plugs in dyno testing conducted by Enerpulse Inc. In addition, the testing demonstrated a fuel economy increase of 4.26 percent, said the company.

The Pulstar gg1 Pulse Plug for Jeep vehicles that utilize the Chrysler Pentstar 3.6L engine have shown an increase of six horsepower (HP) over stock plugs in dyno testing conducted by Enerpulse Inc. In addition, the testing demonstrated a fuel economy increase of 4.26 percent, said the company.

The Pulstar gg1 Pulse Plug fits the V6 engine applications for the 2011 to present Jeep Grand Cherokee in the following models: Laredo "E," Laredo "X," 70th Anniversary Edition, Trailhawk, Altitude Edition, Limited, Overland and Overland Summit Edition.

It also has fitment for the 2012 to present Jeep Wrangler in the following models: Sport, Unlimited Sport, Sport "S," Unlimited Sport "S," Freedom Edition, Unlimited Freedom Edition, Altitude Edition, Unlimited Altitude Edition, 70th Anniversary Edition, Unlimited 70th Anniversary Edition, Sahara, Unlimited Sahara, Moab, Unlimited Moab, Rubicon, Unlimited Rubicon, Rubicon 10th Anniversary and Unlimited Rubicon 10th Anniversary.

Pulstar Pulse Plugs are installed on all touring Jeeps used by the popular “Pink Jeep Tours” of Sedona, Ariz. Pink Jeep Tours has been scrambling up and over Sedona’s magnificent Red Rock outback for over 50 years. Started as an impulse by a cornet player from California to entertain friends and sell some land, Pink Jeep Tours has become the unforgettable, you-gotta-do-it thrill of any Sedona visit.

Today, Pink Jeep Tours is the granddaddy of off-road touring and the longest running adventure company in the country. For more information, visit www.pinkjeeptours.com/sedona.

According to the company, Pulstar Pulse Plugs look like a spark plug on the outside, but a unique capacitor-based circuit inside captures energy normally wasted by spark plugs and generates a spark with 20,000 times greater energy. For more information, phone 888-800-6700 or visit www.pulstar.com.

 

You May Also Like

Diagnosing Intercooler Boost Trouble Code P0299

The criteria for setting the code is very basic.

A code P0299 for lower- than-normal boost can be one of the most challenging DTCs to resolve. You might think it is a code for a leak, but it could be more than a leak. The criteria for setting the code is very basic. The engine management system is looking at the desired boost pressure and the actual boost pressure, if the actual and desired do not match for the conditions. 

Honda Electronic Throttle Body Service Tips

Using care and following OEM procedures will help you to avoid unnecessary parts replacement and comebacks.

Why Alternators Are Subject To Ripple Voltage

The alternator produces an AC current that must be converted into DC current by way of a rectifier.

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

Other Posts

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.