Tip Clip: Basic Component Test Trouble Codes Using Tech 2 – UnderhoodService
Connect with us
Close Sidebar Panel Open Sidebar Panel

News

Tip Clip: Basic Component Test Trouble Codes Using Tech 2

What we’re focusing on here is, you just did an engine job, or maybe you replaced the transmission, cylinder head job. You’ve had a significant portion of the vehicle disconnected underneath the hood. And you want to know, does everything have integrity? So in this particular case study, we’re going to go look to see if there are any trouble codes. We’ve done some work on the engine. We’ve had some things taken apart underneath the hood, and we want to use the scan tool make sure that the basic component test portion has passed. So let’s take a look at that.

This clip is an excerpt from the 135 minute comprehensive “Using Your Tech 2” with Bob Pattengale, available from Automotive Video.

Advertisement

What we’re focusing on here is, you just did an engine job, or maybe you replaced the transmission, cylinder head job. You’ve had a significant portion of the vehicle disconnected underneath the hood. And you want to know, does everything have integrity? So in this particular case study, we’re going to go look to see if there are any trouble codes. We’ve done some work on the engine. We’ve had some things taken apart underneath the hood, and we want to use the scan tool make sure that the basic component test portion has passed. So let’s take a look at that.

Advertisement

This clip is an excerpt from the 135 minute comprehensive “Using Your Tech 2” with Bob Pattengale, available from Automotive Video.

Advertisement
Click to comment
Connect
UnderhoodService