Tech Tip: Replacing AWD Rear-Wheel Bearings on Subaru Vehicles – UnderhoodService

Tech Tip: Replacing AWD Rear-Wheel Bearings on Subaru Vehicles

When replacing rear-wheel bearings on 1994 all-wheel-drive Legacy, Impreza and SVX vehicles, be certain not to over torque the lateral link bolt that secures the two transverse suspension arms to the wheel bearing housing. Do not air gun the bolt off. The proper torque is probably less than you think.

When replacing rear-wheel bearings on 1994 all-wheel-drive Legacy, Impreza and SVX vehicles, be certain not to over torque the lateral link bolt that secures the two transverse suspension arms to the wheel bearing housing. Do not air gun the bolt off. The proper torque is probably less than you think. Since the torques are different for the various models and years, refer to the appropriate manuals for the proper specs for the vehicle on which you are working. If this bolt is overtorqued, it can deform the housing and may lead to a repeat failure of the wheel bearing.

If you encounter a repeat failure of a rear-wheel bearing occurring in an unreasonably short amount of miles, the housing may have been deformed during the first repair. Replacement of the bearing and the housing may be required.

There are some other things to remember when working on the wheel bearings. Never loosen or tighten the axle nut with the weight of the vehicle on the wheel. The vehicle should be in the air with the wheel removed prior to loosening or tightening the axle nut. If this precaution is not taken, damage to the wheel bearing may occur. The axle nuts are not reusable. A new nut should be used with the new bearing. Always ensure that the new bearing is properly packed with suitable wheel bearing grease. The grease that the bearing is shipped with is not sufficient. Always use the proper special tools to install the bearing and torque the axle nut to the correct specifications.

Technical service bulletin courtesy of ALLDATA.

For additional information, visit www.alldata.com.

You May Also Like

Is Training For The Sake Of Training Always Worth It?

Technology changes every day. Are you keeping your techs in top shape?

We all know the value of training - or do we? Is it always valuable? Is it alway effective? Should it always take top priority?

Naturally, you want to say yes, but experts say the RIGHT training for your team's needs is what's really crucial.

This episode of Talking Shop with ShopOwner focuses on the challenges of training technicians and service advisors in the automotive industry. The guests, Dave Boyes and Ron Shanas from Today's Class, discuss the importance of training in a rapidly changing technological landscape and the difficulties shop owners face in finding time for training amidst busy schedules.

Comprehensive Guide to Serpentine Belt and Drive System Maintenance

Properly maintaining the entire drive system prevents premature belt wear and system failure, ensuring customer satisfaction and vehicle reliability.

Randy Breaux, Group President, GPC North America, Talks to AMN Drivetime

At NAPA, “Breaux Knows” business relationships, ABCs to avoid, and serving the automotive professional.

Understanding Customer Clunking And Clicking Complaints

Can Your Techs Diagnose and Repair Modern Axle Complaints?

BMW Spark Plug Replacement

Here are a few things that you need to know before replacing spark plugs in a BMW.

Other Posts

Blink CEO to Present at Energy, Power & Renewables Conference

The event is scheduled for June 17 at 1:10 p.m. ET.

How Modern Car Sensors Optimize Performance and Emissions

Learn how Standard ensures accuracy, speed, and durability in their sensors to maximize engine performance and efficiency.

Tool Time Podcast: Lumileds

Nadine and Eric sit down with Lumileds’ Aubry Baugh to discuss all the professional lighting solutions the company has to offer.

Diagnosing Intercooler Boost Trouble Code P0299

The criteria for setting the code is very basic.