New PRO-LOGIX 100A Flashing Power Supply From SOLAR
Connect with us
Close Sidebar Panel Open Sidebar Panel

News

New PRO-LOGIX 100A Flashing Power Supply From SOLAR

Clore Automotive introduces a new 12-volt 100A flashing power supply and 60/40/10A battery charger from SOLAR. The PL6100 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming.

Advertisement

Clore Automotive introduces Model PL6100, a new 12-volt 100A flashing power supply and 60/40/10A battery charger from SOLAR. The PL6100 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming. It also provides full-service battery charging capability from 10 to 60 amps to service everything from small vehicle batteries to group 31 batteries.

Advertisement

In power supply mode, the PRO-LOGIX PL6100 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successful reprogramming. It features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments, allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. It features fast load responsiveness for ultra-quick recovery from system demand increases. It also delivers its power with minimal voltage ripple, providing a clean flow of power to the vehicle without risk of programming interference.

Advertisement

In charging mode, the PL6100 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced. The PL6100 features the ability to properly charge a wide variety of lead acid battery types, including Conventional, AGM, Spiral Wound, Start-Stop, Deep Cycle and Marine batteries — for virtually any lead acid battery type installed in a vehicle, the PL6100 can deliver a proper, beneficial charge.

In charging mode, the PL6100 adapts its approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft-start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation when charging in extreme temperatures. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged, including over-voltage protection, reverse polarity protection, smart clamp technology and battery fault detection.

Advertisement

For more information: cloreautomotive.com

Advertisement
Click to comment
Connect
UnderhoodService