Automotive Repair Shops: How Accurate Are Reviews?

How Accurate Are Reviews?

According to some surveys I’ve seen, over 80 percent of the buying public relies on reviews as a way to determine if a product or service is a worthwhile investment. The problem is that it can be difficult to tell when those reviews are a true depiction of the business or product and when they’re being skewed by a person’s attitude and biases.

Automotive service seems to be one of the main services that gets thrust under the microscope with the average consumer. It doesn’t matter if it’s a dealership or an independent shop, somebody always has a gripe about something. I have a feeling that most of these disgruntled people are the same type of individual who goes to a restaurant, eats their entire entrée, then complains to the manager that they found a hair in their soup and want the whole meal removed from their bill.

I’m convinced that a lot of these negative reviews are more of a case of “you get what you pay for” than anything else. I tend to wonder what is going through the minds of some customers who decide to go to a rundown repair shop in an old building with a hand-painted sign dangling by a rusty nail, only to complain that the service and repair were substandard. What did they expect?

What’s more disturbing are those who leave a negative comment, but don’t have the nerve to leave their real name or come to the shop first to try to rectify the situation. I guess some people would rather complain than try to get their issues fixed.

Are You Part of the Problem?
Not every negative review is unfounded, of course. Sometimes our own shortcomings get in the way of successful customer relationships. For example, do you consider yourself a no-nonsense, straight shooter? While you may think you’re getting right to the point with your customers, your tone of voice and off-color sarcasm may not be for everyone. For me, I’ve never been one to think I was going to make personal friends with everyone who came in the door — I always figured, you get what you give. You come in with an insulting attitude about my trade and profession, you’re going to get a similar type of attitude back at you.

This is where as a shop owner, or head mechanic, you’ve got to take a step back and realize the service counter may not be the best place for you. If your expertise is diagnosing the various systems in today’s vehicles, but you’re not much interested in holding a meaningful conversation with a soccer mom, you might focus on spending your time under the hood. Knowing how to repair vehicles is one skill set; getting the work in the door is another. That’s where hiring a service writer or taking some business coaching classes to become more aware of how you interact with customers can come in handy. Everybody has their strengths and weaknesses. Find yours and those of your employees, and then leverage them to more effectively run your shop.

Is There a Cure?
The big thing to consider is whether or not your reviews are justified. You have to ask yourself, “Are these reviews worth the time to worry about, or are they not a real representation of the shop?” Either way, if 80 percent of the buying public is paying attention to reviews, it is something of which you have to be mindful.

So, what to do about combating negative reviews? Well, it’s pretty simple. Ask all of your customers to leave an online comment every time they have any service work done at your shop — don’t let the few misanthropes out there outshine the majority of your happy, satisfied customers. Start using these review sites as a billboard to let everyone know what you do and how well you do it, not just as a complaint department for those disgruntled irritants who try to use the Internet as a weapon.

You May Also Like

BMW Tech Tip: Oil Separator Replacement

A clogged oil separator valve is a common problem on many BMW DOHC inline sixes. The high failure rate is caused by sludge build-up that can result in oil burning, rough idle and engine fault codes. Although the solution is pretty simple, replacing the valve is labor intensive and can take anywhere from six to nine hours.

A clogged oil separator valve is a common problem on many BMW DOHC inline sixes. The high failure rate is caused by sludge build-up that can result in oil burning, rough idle and engine fault codes. Although the solution is pretty simple, replacing the valve is labor intensive and can take anywhere from six to nine hours.
As it does with timing belt service, CRP Automotive suggests inspecting related parts during the repair to see if they need replacement. You should always replace the breather hoses. They get brittle with age and will eventually fail. They may even break during removal. This will save your customers the headache of coming back. Same tip goes for the intake boot. Check if it’s brittle or cracking.
CRP Automotive also suggests using the cold weather oil separator valve. It has molded foam that will help prevent sludge from building up in the valve and the hoses.
CRP offers Rein Automotive cold weather valves, hoses and air intake boots, as well as kits to make the job even easier.
Courtesy of CRP Automotive

New IDUSA Premium Guard Website Offers Easy Access To Wide Range Of Oil, Air, Cabin, Fuel And Transmission Filters

The new website’s bi-lingual, responsive design features look-up powered by ShowMeTheParts.

VIDEO: How To Deal With Air Conditioning Smells

Andrew Markel discusses what to do to get rid of A/C smells after customers have tried to do it themselves.

Oil Bath Air Filters

Long before people started using cotton gauze air filters soaked in oil, the oil bath air filter was the dominant filter on the market. The filter removes debris in the air by running it over oil and a mesh element. These filters worked great when most roads were dirt, but they could be messy to clean.

On The Web – September 2016

Finding Failing O2 Sensors If an O2 sensor gets “lazy” because of old age or contamination, the computer may not be able to adjust the fuel mixture quickly enough as the engine’s operating conditions change. Related Articles – Join Underhood Service On LinkedIn – Honda Tech Tip: Oil Pressure Switch Fails Intermittently – Fuel Trim

Other Posts

Check Out The August Issue Of Underhood Service Magazine

The digital version of the August issue of Underhood Service is available on-line. Access the easy-to-view digital version that features articles on Throttle By Wire, A/C Diagnostics, Fuel Injectors, Removing Bad A/C Smells, Rubicon Diagnostic Dilemma, Top Turbo Service Tips, Belt Inspection Checklist, Oxygen Sensor Replacement, a host of Tech Tips, and more!

Hayden Automotive Introduces Low-Profile Fan Clutch

Sitting at just 2.7 inches tall, the new low-profile fan clutch maintains the performance of the original fan clutch, but in a much smaller package. According to Hayden, this provides room for a thicker radiator when doing V8 restoration projects.

Belt Inspection Checklist

You might have only one chance to sell a customer a new serpentine belt. With belts lasting roughly 90,000 miles, proper inspection at the time of failure is critical not only for selling the belt, but also for ensuring add-on sales and better customer satisfaction. These are the steps you should be performing on every car or truck that enters your shop.

Preventive Maintenance Profits: Preferred Automotive, Jenkintown, PA

With the summer months heating up and cross-country road trips beginning, many people want to make sure their vehicles are prepped for the long haul. For the first-ever July edition of Maintenance Chronicles, we will focus on Preferred Automotive Specialists, a six-bay shop located in Jenkintown, PA. Related Articles – Autoshop Solutions Partners With Turnkey