Protect Your Fuel Tank and Pump With Delphi Technologies

Protect Your Fuel Tank and Pump With Delphi Technologies 

Sponsored by Delphi Technologies

The fuel tank and pump are considered the lifeblood of a vehicle, supplying and circulating fuel to other critical components throughout the vehicle. 

Delphi Technologies has been a manufacturer of fuel delivery parts for over 80 years, and a lot has changed since then. 

With over 30 OE-proprietary innovations and 150 patents in fuel technologies and fuel management sales coverage at 95%, Delphi Technologies is proud to be one of the top suppliers in the aftermarket industry. 

Delivering premium parts at every turn 

As a Tier 1 supplier to the top 25 global vehicle manufacturers, our reputation is built on delivering high-quality parts. Here are just a few of the ways we ensure our parts are top-notch:

  • All our products must meet or exceed OE-specifications
  • A dimensional analysis is performed on each part to locate potential design improvements 

Tested to endure the harshest conditions

All our components undergo also rigorous testing and are built to latest in the toughest scenarios. These are just a few of the tests we perform: 

  • Polarity Testing
  • FLVV Leak (Safety) Testing
  • Fuel Level Sensor Testing
  • Automotive Fluid Compatibility (Contaminate Test)
  • Performance Endurance Vibration Testing

Distinctly Delphi – Fuel Technology you can rely on

What makes our fuel technology so different?

  • Anodized aluminum can reduce flow loss by up to 100% in severe contamination
  • New carbon commutator extends pump life by up to 300% over copper by reducing oxidation and premature wear
  • Over-molded armature protects pump windings in corrosive environments
  • Button style contacts feature additional wear material that can last for over 1 million cycles
  • High capacity synthetic mesh can filter out all items larger than 30 microns

And when it comes to our fuel pumps, we also have a few unique features:

  • Increased terminal sizeand enhanced connectors eliminate excessive electrical resistance, improve heat dissipation and boost current outflow capacity
  • High durability noble metals fuel level sensor for improved long-term sensor integrity

What causes a fuel pump to fail?

Eventually, fuel pumps need to be replaced after about seven to ten years. However, if your fuel pump fails before this, there’s likely something that needs to be fixed. So, what are some of the common causes of premature failure?

  • Running your vehicle near empty doesn’t keep the fuel pump fully submerged, which may cause the pump to overheat
  • Extreme hot/cold environments
  • Contamination in the fuel tank

Did you know that the warranty on your new pump may be voided if you don’t clean tank before replacement? Maintenance is one of the easiest ways to not only ensure optimized performance, but it can also greatly extend the life of both your fuel tank and pump.

Installing a new fuel pump in a dirty fuel tank can cause premature wear, or worse, a brand-new pump to fail completely. That’s because dirt, debris, and contamination in the fuel tank can clog the brand-new strainer, which was most likely the cause of the previous fuel pump failure.

We know it can be difficult to keep your fuel tank and pump clean—that’s why we’ve developed two solutions to help!

Introducing the Fuel Tank Cleaning Kit and Tool

Even the toughest fuel pumps need to begin their life in a clean environment. Delphi’s recommended method to clean the tank is using our low-suds cleaning solution kit (FC01). It is designed to easily treat and rinse up to a 40-gallon capacity fuel tank. 

The cleaning kit (FC01) includes:

  • One bottle of low-suds cleaning solution
    • Removes microbial growth in the tank
    • Breaks down varnish and debris 
    • Minimizes sludge and other fuel contaminants
  • Gloves
  • Lint-free cloth

Dropping the tank to perform maintenance can be both a timely and laborious task. That’s why we developed the Fuel Tank Cleaning Tool (FC02), which can help clean those hard-to-reach places inside the fuel tank in less than five minutes!

  • Designed for use when removing the tank to clean and rinse (recommended) is too difficult
  • Innovative design fits into any tank and swivels to clean corners 
  • Three rare earth magnets installed in the head—paired with fitted wipe—to help capture debris
  • Five custom fit microfiber wipes

Delivering premium parts at every turn 

As a Tier 1 supplier to the top 25 global vehicle manufacturers, our reputation is built on delivering high-quality parts. Here are just a few of the ways we ensure our parts are top-notch:

  • All our products must meet or exceed OE-specifications
  • A dimensional analysis is performed on each part to locate potential design improvements

Tested to endure the harshest conditions

All our components undergo also rigorous testing and are built to latest in the toughest scenarios. These are just a few of the tests we perform: 

  • Polarity Testing
  • FLVV Leak (Safety) Testing
  • Fuel Level Sensor Testing
  • Automotive Fluid Compatibility (Contaminate Test)
  • Performance Endurance Vibration Testing

Distinctly Delphi – Fuel Technology you can rely on

What makes our fuel technology so different?

  • Anodized aluminum can reduce flow loss by up to 100% in severe contamination
  • New carbon commutator extends pump life by up to 300% over copper by reducing oxidation and premature wear
  • Over-molded armature protects pump windings in corrosive environments
  • Button style contacts feature additional wear material that can last for over 1 million cycles
  • High capacity synthetic mesh can filter is able to filter items as small as 30 microns

And when it comes to our fuel pumps, we also have a few unique features:

  • Increased terminal size and enhanced connectors eliminate excessive electrical resistance, improve heat dissipation and boost current outflow capacity
  • High durability noble metals fuel level sensor for improved long-term sensor integrity

Delphi Technologies is proud to be one of the top suppliers in the aftermarket industry, with over 30 OE-proprietary innovations, 150 patents in fuel technologies, and fuel management sales coverage at 95%.

Be sure to check out the FC01 and FC02 in action: https://youtu.be/I66xQhfSwYU

This article is sponsored by: Delphi Technologies

You May Also Like

A Closer Look: Gasoline Direct Injection (GDI)

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has grown by over 600% since 2010. This means that in the next five years, 42 million more vehicles with GDI will enter the Aftermarket “Sweet Spot” of 6-12 years old, during which their injectors and related parts may need to be serviced or replaced. While GDI systems have proved effective, these systems encounter specific failures and require an understanding of how they work and how to test them when they set a code.

A Closer Look: Electronic Throttle Bodies

A shop’s reputation is affected by things like accuracy of diagnosis, quality of the repair, and friendly service. Equally as important is the quality of the parts installed. If the shop does everything right, and the part fails, the customer will ultimately be upset with the shop. When a new part fails, the customer is

Enhancing Efficiency and Streamlining Operations: The Benefits of Utilizing Nexpart Multi-Seller for Repair Centers

In today’s fast-paced automotive repair industry, staying ahead of the competition is crucial for repair centers to thrive. One key aspect that can significantly impact operational efficiency and customer satisfaction is the availability of OE, Aftermarket, Heavy Duty & Salvage parts. Here are just a few advantages of incorporating Nexpart Multi-Seller, a cutting-edge parts ecommerce

Get your vehicle road trip ready with these summer tips 

Summertime is a great time to take your car out on the open road, but it’s also important to ensure that your vehicle is in tip-top shape. Regular preventative maintenance can help you avoid costly repairs and keep your car running smoothly. Make sure you’re ready with these helpful tips from Delphi Technologies. Chassis The

A Closer Look: Ignition Coils

OE coils are known for their high failure rates. Engine misfires, rough idle, a decrease in power under acceleration, poor fuel economy, and a check engine light are all signs of an ignition coil that has failed. Read along for more technical information on how to diagnose a failed coil, and why the original equipment

Other Posts

Spark Plug Evolution

Spark plugs have changed over the years.

Engineering behind chassis: high and low-friction parts

What is overengineering? Overengineering is often described as designing a product or solution in an unnecessarily complicated way where a simple solution had been shown to have the same efficiency, or is even more effective than the original.  In the aftermarket world, the OE part is where the journey starts. It begins with testing and

A Closer Look: Turbocharger Operation and Installation

Turbocharger Overview With an effort to increase fuel efficiency, maintain performance and reduce emissions, vehicle manufacturers are adding turbocharged engines to their lineups at a significant rate. Over the next five years, the turbo service market will continue to experience substantial growth.  At a basic level, a turbocharger consists of just three major internal components:

Batteries – AGM Failures

Providing your customer with the correct group size and type of replacement battery is more important than ever.