With a $40 manufacturer’s rebate and an estimated retail price around $400 before rebate, it’s easier than ever to own the Hobart Handler 125 EZ industrial-grade flux cored wire welder. Featuring a single control knob, the Handler 125 EZ enables someone with little or no welding experience to start producing good welds with minimal practice.
Rebate forms, along with ideas for welding projects and welding advice, can be found at HobartWelders.com. The rebate is for Handler 125 EZ units purchased between May 1 and June 30, 2006, along with the UPC code from the side of the box and the original store receipt.
While the Handler 125 EZ is Hobart’s most affordable welder, its industrial-grade construction and arc performance satisfy even professional welders. The Handler 125 EZ provides strong welds and good weld consistency on steel thicknesses ranging from 18 gauge to 3/16 in.
While welding may appear difficult and dangerous, the right equipment and standard safety precautions make welding easy, fun and safe. Anyone with decent hand-eye coordination can make a good weld using the Handler 125 EZ after just a few hours of practice.
SIMPLE CONTROL
The Handler 125 EZ offers quicker and easier set up than any other welder in its class. A single selector switch automatically sets the right welding parameters based on the thickness of steel being welded. Users only need to set the selector switch, pull the trigger and begin welding.
The unit comes ready to weld mild steel using .030 or .035-in. flux cored wire. For portability, it weighs 50 lbs. and plugs into a typical 120-V outlet. This unit has a maximum output of 125 amps.
Hobart backs the Handler 125 EZ with its 5/3/1 warranty, which covers the transformer for five years, the switches, controls and valves for three years and the torch for one year. Hobart Welding Products offers a complete line of industrial-grade Stick, MIG, TIG and spot welders, plasma cutters and generator/welding power sources designed for easy use.
Hobart products are available through farm and tool retail stores as well as welding supply distributors. More information is available at HobartWelders.com, and free literature can be obtained by calling toll-free 877-HOBART1 (877-462-2781), faxing (877) 327-8132 or writing Hobart Welding Products, P.O. Box 100, Lithonia, GA 30058.
