Delphi Announces New Ignition Coils For Almost 10 Million Vehicles – UnderhoodService

Delphi Announces New Ignition Coils For Almost 10 Million Vehicles

Delphi announces the launch of 12 new ignition coils cover more than 9.6 million Audi, Honda, Nissan, Jaguar, BMW, GM, Hyundai, Kia, Volvo and Toyota applications from 1998 to 2012.

Delphi announces the launch of 12 new ignition coils cover more than 9.6 million Audi, Honda, Nissan, Jaguar, BMW, GM, Hyundai, Kia, Volvo and Toyota applications from 1998 to 2012. New part numbers are: GN10322, GN10323, GN10324, GN10325, GN10326, GN10327, GN10328, GN10329, GN10330, GN10331, GN10332 and GN10334.

Ignition coils operate in a tough environment. Stresses created by vibration, temperature changes and even the failure of spark plugs and other components can cause ignition coil wiring to break or short out. The insulation inside the ignition coil can also fail, causing energy to escape.

Delphi says it backs up its innovative ignition coil design with intelligent manufacturing and uses a winding process technique to control the length of wire between adjacent windings. More length results in greater voltage differences, which can create more pressure that could break down the insulation and wire coating, the company says.

Delphi says it has analyzed the environment that ignition coils must withstand and is combating failure issues with high-quality design and materials, including high-quality wires and wire coating that resist the cracks, pin holes and imperfections that most often lead to failure issues. Delphi also uses an epoxy vacuum technique to reduce air bubbles in the epoxy, because having fewer air bubbles increases the epoxy’s insulation quality and reduces the chances of energy punch-through failures.

Inventory will be available at the end of the second quarter of 2013. Visit go.delphi.com for specific part information.

You May Also Like

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment.

Management and operations of the privately owned company are unchanged. 

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to your study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Bendix Releases Technical Materials for ADAS Support

They are designed to help technicians properly set up, inspect, and diagnose several components integrated with ADAS.

Dayco Adds Almost 30 Part Numbers in March

The 29 new part numbers will be available by the end of March for distributors interested in adding to their product coverage.

Other Posts

Non-Competes: A Non-Starter, Says FTC

The FTC’s rule is set to take effect in about four months, unless it is blocked by legal challenges.

ASE Designates June as Automotive Service Professionals Month

ASE urges industry members to embrace Automotive Service Professionals Month as a platform for expressing gratitude.

ZF Aftermarket Releases 80 New Parts

The latest additions expand coverage to more than 5 million vehicles in operation.

Vehlo Acquires Shop Management Software, Shop-Ware

Shop-Ware is a cloud-based shop management platform catering to independent automotive aftermarket repair shops.