Cold and Flu: Prepare Your Shop For The Season

Cold And Flu: Prepare Your Shop For The Season

While having to deal with the onslaught of symptoms is reason enough to protect yourself from cold and flu germs, the cost of missing work due to an illness could be even greater.

It starts innocently enough. You wake up with a barely perceptible scratchy throat and runny nose. The next thing you know, your head hurts, your muscles ache — you simply do not feel well.

While having to deal with the onslaught of symptoms is reason enough to protect yourself from cold and flu germs, the cost of missing work due to an illness could be even greater. According to Walgreens, the flu cost American workers $8.5 billion in lost wages from unpaid sick days during the winter of 2012-13. A related Walgreens study found that many workers end up spending more than $250 out of pocket to treat these symptoms.

The good news is that you don’t need to be a casualty of the winter-germ season. Taking proper precautions can help reduce your chances of getting sick and missing work. Here are the top five ways to protect yourself this fall and winter from those illness-causing germs.

1) Get a Shot in the Arm: Unfortunately, once you catch the flu bug, there isn’t a bottle or pill in the medicine aisle that can turn back the hands of time. That’s why it is important to defend yourself from getting sick before symptoms take hold. According to the Centers for Disease Control and Prevention (CDC), getting an annual flu vaccine is one of the most important preventive measures to reduce the risk of coming down with the flu. Make it a point to have your whole shop vaccinated to ensure you stay productive all season long.

2) Sanitize, Sanitize, Sanitize: Working in a repair shop and interacting with customers goes hand in hand. That means having routine contact with the same contaminated surfaces your customers touch, such as their steering wheel, door handles and gear shifter. The CDC has estimated that up to 80% of infections are transmitted by hand. This is why the practice of good hand hygiene — handwashing and hand sanitizing — is so important. Yet, running to the bathroom to wash your hands isn’t always an option in a busy shop. That’s why it makes sense to have an alcohol-based hand sanitizer readily available at the front desk and next to your bays for easy accessibility.

3) Wipe Away Your Worries: Viruses like the flu and the norovirus (aka, the winter vomiting bug) can live on the hard surfaces in your shop for days. These viruses can easily be passed on through contact. A recent study from Wakefield Research found that 57% of Americans do not wash their hands after engaging in one or more “unsanitary acts,” which include things like using the restroom, sneezing or coughing into one’s hands and being around someone who is visibly sick. These bugs can find their way onto everything in your shop, from computer keyboards to the vending machine buttons. Make sure to routinely wipe down the most commonly touched surfaces in your shop with surface sanitizers and disinfectants to stop the spread of these cold and flu germs.

4) Go Back to Basics: When it comes to warding off illness, your mom was right. Eating right, getting enough sleep and exercising are simple steps you can take to strengthen your immune system.

5) Take One (Sick Day) For the Team: No matter how diligent you are in protecting yourself, illness is sometimes unavoidable. Help prevent the spread of illness in your shop by staying home if your symptoms are bad. Although nobody likes to miss work, the only thing worse than having one employee out for the day is having your whole shop sidelined with cold and flu symptoms.  

You May Also Like

Ball Joints – How To Avoid Memory Steer

Follow all instructions to avoid issues caused by incorrect installation. This video is sponsored by Auto Value and Bumper to Bumper.

If your shop works on trucks like the Ford F 250 or Dodge Ram 2500, you know that these have a solid front axle. During their lifetime, chances are the ball joints will need to be replaced.

Trucks like these have ball joints because they're four wheel drive and the axle goes between where the kingpin used to be. When you're installing the two ball joints it's critical that they're installed on-axis. If they're installed off axis – in other words, one ball joint doesn't line up with the other – you could have issues with memory steer. When memory steer happens, the driver will notice that, as they're going around a corner and releasing the steering wheel, it may not return.

Sustainability And Automotive Batteries

Sustainability starts with you, and recycling is a great way to go green. This video is sponsored by The Group Training Academy.

PRT Releases 28 New Complete Struts in North America 

The new items represent nearly 6 Million vehicles in new coverage and come to expand the PRT portfolio in the North American Aftermarket.

Alternators and Ripple Voltage

The alternator produces an AC current that must be converted into DC current by way of a rectifier.

Mullen Announces EV Battery Exchange Program

POWER BOOST enables existing Class 1 EV cargo van customers the opportunity to upgrade their lithium-ion battery packs to solid-state polymer battery packs, increasing Class 1 vehicle range to over 200 miles.

Other Posts
Power Window Regulator and Motor Service

Power windows are great as long as they roll up and down when commanded to do so.

Toyota Invests in EV Charging Network IONNA

IONNA plans to install at least 30,000 charging ports in North America by 2030, and stations will include both NACS and CCS connectors to support all BEV drivers.

Hybrid & BEV Cooling System Maintenance 

Do they need coolant replacement?

Following AC System Service, How Much Oil Is Needed?

Learn how to determine the correct amount of oil to add when replacing the compressor in an AC system.