Thursday’s 2010 MAHLE Engine Builder Showdown Final Set – UnderhoodService

Thursday’s 2010 MAHLE Engine Builder Showdown Final Set

Pro Motor Engines will again appear in the championship round as they take on Hendrick Motorsports in the 11th annual MAHLE Engine Builder Showdown Thursday afternoon.

Pro Motor Engines will again appear in the championship round as they take on Hendrick Motorsports in the 11th annual MAHLE Engine Builder Showdown Thursday afternoon.

Mike Maiwald and Scott Vester of Hendrick Motorsports will face off against Pro Motor Engines – 2009 showdown champions – but with two new teammates for 2010 – Josh Hypes and Matt Jackling. This is the fourth consecutive year a team from Pro Motor Engines has made an appearance in the championship round.

The finale of the MAHLE Engine Builder Showdown will be held at 5:30 p.m. Thursday during “NASCAR Rev’d Up,” an event during NASCAR All-Star Week. It will be held on the side stage between 3rd and Mint Streets in Uptown Charlotte.

Former NASCAR Crew chiefs Jeff Hammond and Larry McReynolds will host the finale of the MAHLE Engine Builder Showdown, which is a tiered, three-round competition designed to recognize the knowledge, skill and speed of professional engine builders who assemble special performance engines for NASCAR teams.

In Tuesday’s second round in which teams had to build a complete Chevrolet R07 race engine in the fastest time and successfully run it for one minute, Hendrick Motorsports (19 minutes, 28 seconds) defeated the Roush-Yates Engines Team – 2009 runner up – by only 22 seconds to advance, while Team Pro Motor edged out the competing Penske Racing Engine team with a record-breaking time of 18 minutes, 11 seconds.

“The MAHLE Engine Builder Showdown is always an exceptional event to watch,” said Bill McKnight, Team Leader – Training for MAHLE Clevite. “And this year it will be interesting to see if the Pro Motor Engine team can keep up the momentum in the final round, or if Maiwald and Vester from Hendrick Motorsports will rally to win the title and become the 2010 MAHLE Engine Builder Showdown champion, win the cash prize, and have their names engraved on the prestigious Randy Dorton Memorial Trophy.”

You May Also Like

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Drive Belt Alignment Alignment is key to the health of an engine belt. The belt drive system is designed to create friction between the grooves on the belt and pulley to transfer power from the crankshaft to the alternator, water pump or power steering pump. If the grooves on the belt do not align with the pulleys, the friction won’t be evenly applied and can result in wear and noise.

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Other Posts

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.