If a customer complains that after refueling the fuel gauge stays on empty, or the operation of the fuel gauge is erratic, it’s caused by the formation of a non-conducting deposit on the conductor surface of the fuel level sensor.
This condition affects Z3 Roadster/Coupe, M Roadster/Coupe (E36/7) produced before Dec. 15, 2000. For Z3 from Sept. 1998, and M Roadster/Coupe, FC 2 (fuel sensor voltage plausibility) will be set in the instrument cluster.
On a customer-complaint basis only, remove and replace the fuel level sensor with a “gold system” sensor (P/N 16 14 6 756 323). Refer to repair instructions 16 12 000.
Courtesy of ALLDATA.
For additional information, visit www.alldata.com.
