Simple Fixes For Bad Battery Connections

Simple Fixes For Bad Battery Connections

Sometimes the obvious cause of a vehicle complaint isn’t the right one. Your diagnostic skills are key.

In this article originally published in our sister publication Transmission Digest, author Mike Greer outlines what can go wrong with a car’s starting or electrical system. It’s simple, says Greer, “starting with the battery and ending with, well, the battery.” According to the author, seemingly every week, his shop gets a vehicle in that has an issue at the battery terminals; and if it isn’t causing an issue right now, it will sooner or later.

Greer highlights several cars, including a 2009 Honda Civic, a 2014 Honda Pilot and a 1999 Toyota 4Runner that all apparent transmission problems that turned out to be battery-related issues.

Whether or not you work on imports, proper diagnostic procedures can save the day. Many times, it’s a simple fix.

RR-Tech-June-Figure-1
Figure 1.

This article was contributed by Mike Greer, who has been with Certified Transmission since 1996 and been in the industry since 1987. He is an ASE master technician and has served as a master builder for the company in the past. 

You May Also Like

Deciphering Engine Misfire Codes

When the fuel/air mixture ignites, many factors must be met to pass a misfire monitor.

Misfires can be one of the most ambiguous codes. The cause of the misfire could be a fuel, spark or mechanical issue. Is a misfire when the cylinder does not fire? Is a misfire when the cylinder fires too soon or too late? The answer is “yes” to both questions. Some misfire complaints are a flashing check engine light, and a P0300 to P0312 diagnostic trouble code (DTC) indicates that one or more cylinders are misfiring. 

Detecting Misfire And Knock Conditions

Knock sensors are mounted on the block near the base of the cylinder head.

Mercedes Ignition Coil Pack Diagnostics

Replacing a single coil might not be the best approach to curing an engine of a chronic misfire.

Chrysler’s Totally Integrated Power Module

The TIPM is on the CAN bus, any issues with the communication between the ECM, ABS and BCM can cause problems with the TIPM.

Mercedes EQS Service Opportunities

EQ is the EV brand for Mercedes. It is the equivalent of Audi’s Etron or VW’s iD brands.

Other Posts

GM No Crank After Auto-Stop Event

These concerns could be caused by a broken or loose engine ground cable/strap, which grounds the engine to the body.

Caring For AGM And Flooded Car Batteries

Faulty battery cables, if loose, corroded, or damaged, can lead to power drainage.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.