Volkswagen Tech Tip: Clutch Pedal Not Returning To Position – UnderhoodService

Volkswagen Tech Tip: Clutch Pedal Not Returning To Position

This tech tip provides some things to consider before unnecessarily replacing hydraulic components on Volkswagen Jetta sedans when diagnosing a customer report that the clutch pedal won't return to its position.

Model: Jetta Sedan, Manual Transmission Vehicles
Some things to consider before unnecessarily replacing ­hydraulic components when ­diagnosing a customer report that the clutch pedal won’t ­return to its position.
– Does it occur when moving or ­stationary?
– Does it happen when the vehicle is turning?
– Are the engine/transmission locating dowel pins in place?
– Are the engine/transmission supports aligned and secure?
– Is there anything under the dash interfering with the pedal assembly?
– Does the ambient temperature have any influence on when it occurs?
– Is there any complaint of noise when it occurs?
– Most important of all, can you duplicate the complaint?
 

You May Also Like

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Drive Belt Alignment Alignment is key to the health of an engine belt. The belt drive system is designed to create friction between the grooves on the belt and pulley to transfer power from the crankshaft to the alternator, water pump or power steering pump. If the grooves on the belt do not align with the pulleys, the friction won’t be evenly applied and can result in wear and noise.

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Other Posts

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.