EnerSys Introduces Group 65 Battery To ODYSSEY Performance Series Product Line – UnderhoodService

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Underhood Service Logo
Technical resources to help diagnose and repair engine-related service issues.
Engine

EnerSys Introduces Group 65 Battery To ODYSSEY Performance Series Product Line

EnerSys has expanded its ODYSSEY Performance Series battery product offering to include the Group 65 battery designed specifically for consumer applications. The ODYSSEY Performance Series 65-760 battery features 762 cold cranking amps (CCA), 129 reserve capacity (RC) minutes and deep cycle capability up to 400 cycles at 80 percent depth of discharge.

Underhood Service Staff Writers
By Underhood Service Staff Writers
Published:

power and long service life of the ODYSSEY Performance Series 65-760 battery makes it reliable for truck enthusiasts and ideal for powering the number of onboard accessories found in today’s passenger vehicles and SUVs,” said Dave McMullen, director of commercial marketing for specialty and UPS markets at EnerSys. “We are pleased to add the Group 65 battery to the ODYSSEY Performance Series and provide a wider selection of batteries to customers.”
 
The battery features a three- to 10-year service life and two-year storage life at 77 degrees Fahrenheit (25 degrees Celsius), according to EnerSys. It is vibration resistant, classified as “non-spillable” by the U.S. Department of Transportation and includes a limited four-year full replacement warranty. It also corresponds to Battery Council International (BCI) Group 65.
 
For more information about ODYSSEY Performance Series batteries, visit www.odysseybattery.com.

Related Articles
   

You May Also Like

Engine

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Underhood Service magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers.
Published:

Drive Belt Alignment Alignment is key to the health of an engine belt. The belt drive system is designed to create friction between the grooves on the belt and pulley to transfer power from the crankshaft to the alternator, water pump or power steering pump. If the grooves on the belt do not align with the pulleys, the friction won’t be evenly applied and can result in wear and noise.

Read Full Article

More Engine Posts
Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

By Andrew Markel
Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

By Andrew Markel
Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

By Andrew Markel
Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

By Andrew Markel

Other Posts

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

By Andrew Markel
Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

By Andrew Markel
Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

By Andrew Markel
Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

By Andrew Markel