SCE Gaskets Product Guide Now Available – UnderhoodService

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Underhood Service Logo
Technical resources to help diagnose and repair engine-related service issues.
Engine

SCE Gaskets Product Guide Now Available

A new trifold brochure from SCE Gaskets provides a concise overview of the company's extensive product line. Products include special racing gaskets, plus a wide range of high-performance street and OEM replacement gaskets.

Underhood Service Staff Writers
By Underhood Service Staff Writers
Published:

Related Articles

A new trifold brochure from SCE Gaskets provides a concise overview of the company’s extensive product line. Products include special racing gaskets (SCE is an official NHRA contingency sponsor), plus a wide range of high-performance street and OEM replacement gaskets. SCE manufactures gaskets for both aftermarket and production engines, including sport compact and nostalgia/classic applications from its Valencia, Calif., and Spencer, Iowa, facilities.      

Also featured in the SCE Product Guide are helpful bar charts that show recommended ranges for various type head gaskets pertaining to static compression ratio, supercharger/turbocharger boost and nitrous oxide “shot” limits.         

The SCE Product Guide also is designed for jobber/dealer use, and has an imprint box on the back page. For more information, call 800-427-5380 or visit www.SCEgaskets.com.

You May Also Like

Engine

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Underhood Service magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers.
Published:

Drive Belt Alignment Alignment is key to the health of an engine belt. The belt drive system is designed to create friction between the grooves on the belt and pulley to transfer power from the crankshaft to the alternator, water pump or power steering pump. If the grooves on the belt do not align with the pulleys, the friction won’t be evenly applied and can result in wear and noise.

Read Full Article

More Engine Posts
Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

By Andrew Markel
Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.

By Andrew Markel
Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

By Andrew Markel
Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

By Andrew Markel

Other Posts

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

By Andrew Markel
Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

By Andrew Markel
Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

By Andrew Markel
Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

By Andrew Markel