Application:
All power steering equipped vehicles.
Problem:
Premature failure of power steering components.
Cause:
Particles not removed during the flushing process or particles from everyday wear of components and hoses cause valves to stick and block fluid flow.
Solution:
When replacing any power steering component, always flush the entire system and then install an in-line filter such shown below (part 20-0038F). Be sure to use OE recommended or equivalent fluid, see Pro Tech 20-0027 for more information.
Note: This ProTech bulletin is supplied as technical information only and is not an authorization for repair.
Tech Tip courtesy of CARDONE Industries, Inc.