VW DSG 02E Transmission: A Diagnostic Pre-Checklist

VW DSG 02E Transmission: A Diagnostic Pre-Checklist

This particular transmission is frequently powered by a diesel engine.

Problems with engine control systems and/or traction control/anti-lock brake systems can have a tremendous negative effect on transmission operation. The VW Direct Shift Gearbox DSG 02E is no different. 

This particular transmission is frequently being powered by a diesel engine which adds another dimension to pre-checking the vehicle when there is a transmission malfunction. 

The following is a suggested diagnostic pre-checklist when dealing with transmission malfunctions. There is no importance placed on the order of the list. 

1. Scan all vehicle systems for codes. Be particularly interested in engine and ABS systems. All four-wheel speed signals must be in perfect order, especially the rear wheel speed sensors. All tire sizes need to be the same. Watch for over-inflated and under-inflated tires as well. 

2. Be sure there are no engine vacuum leaks 

3. Check EGR valve. Diesel engines produce soot that acts like bad cholesterol in the body clogging arteries. 

4. Check the fuel filter for signs of a faulty tandem pump mixing oil with diesel fuel. 

5. Check to see if there has been any tuning done that may be malfunctioning. 

6. Check the condition of the transmission fluid. Degradations can cause shift and shudder issues. 

7. Perform a load test on the battery and check charging voltage and ground circuits. For some vehicles, the negative and positive battery cables become corroded, increasing resistance in the cable itself. This will cause sneaky irritating issues with the electrical systems.

You May Also Like

Detecting Misfire And Knock Conditions

Knock sensors are mounted on the block near the base of the cylinder head.

The knock sensor is a piezoelectric accelerometer that acts as a microphone on the engine. It converts vibrations into alternating current (AC) signal. When the crystal inside the sensor is vibrated, it produces an AC voltage. The greater the vibration or shock, the higher the voltage and frequency.

Mercedes Ignition Coil Pack Diagnostics

Replacing a single coil might not be the best approach to curing an engine of a chronic misfire.

Chrysler’s Totally Integrated Power Module

The TIPM is on the CAN bus, any issues with the communication between the ECM, ABS and BCM can cause problems with the TIPM.

Mercedes EQS Service Opportunities

EQ is the EV brand for Mercedes. It is the equivalent of Audi’s Etron or VW’s iD brands.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

Other Posts

Chassis Control Modules After Reconnecting Battery

To resolve the issue, fully disconnect the negative lead from the battery terminal.

Reflashing Power Supplies

A power supply to keep the system voltage consistent is a required piece of equipment to perform a reflash procedure.

BMW Transfer Case Service

The transfer case is a rather unique design in the way that it operates a clutch pack mechanically, not hydraulically.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and you’ll need a scan tool to measure the signals