Viewpoint: The Future of Brakes – UnderhoodService

Viewpoint: The Future of Brakes

How stability and traction control systems will change the industry as we know it. I hear all of the moaning and groaning out there about how new cars are better made, require less maintenance and break down less often. But, they still need to stop and this means they will always need brakes. Brake pads and rotors are here to stay, and the market is predicted to get even better in the future. It is my prediction that what the “check engine light” did for the underhood repair market, the traction/stability control light will do for the brake repair market.

In their commercials, many automakers make keeping the vehicle on the road using new traction and stability control systems seem like magic. Ask any driver how the systems work and he will just shrug. Technicians know that it is the brake system that is responsible for this new level of safety.

Brake pads on a rotor now increase traction, keep the car on four wheels and even help a car turn a corner. Also, they can help some AWD vehicles mimic or simulate locking differentials while off roading. It all comes down to brake pads pinching a rotor.

It is my prediction that in the next decade, processing speeds of the body-control computers will drastically increase. Also, wheel speed sensors will not only measure wheel speed, they will measure torque generated by the brakes and engine in real time. The computer will be able to look at the friction levels of the brake pads and determine if the pad is below standards and turn on a “check brakes” light. Also, these systems will even be able to tell if there is a pulsation problem long before the driver can feel it. Gone will be the days of $99 pad swaps and substandard $9.99 do-it-yourself brakes pads.

The industry must make consumers aware that it is the brake system that is doing the all work for traction and stability control. Most consumers think that it is the hand of God that is saving them. This is a public service message that the aftermarket and automakers must undertake in the near future. If consumers understand that the brake pads and rotors ultimately decide their fate, they will become more aware of the importance of brake service.

Today’s automotive safety campaigns always seem to show the vehicle almost hitting a child, pet or unmovable object. For this campaign, we need blood and guts, just like in the old days. Show an SUV on its roof or a car taking out a guardrail — it is the only way you are going to get the public’s attention. Let’s not have a repeat of the 1990’s ABS public information campaign that left the public with more questions than answers.

The other side of this double-edged sword is the new level of knowledge needed to service these systems when the traction and stability control light comes on. It will take scan and scope tools to solve these problems, along with large dose of theoretical electrical knowledge. This means investing in tools and training.

The future is bright if you are prepared to deal with it.

You May Also Like

Transmission Line Replacement

Transmission fluid likes to be at a constant temperature. If it is too hot or too cold for too long, the performance can fluctuate and potentially cause damage to the transmission.

Transmission fluid likes to be at a constant temperature. If it is too hot or too cold for too long, the performance can fluctuate and potentially cause damage to the transmission.
If the fluid is at a constant temperature, it behaves in a consistent manner in terms of its friction and lubrication properties. What can help control the temperature is the transmission cooling circuit.
The path of the fluid in the transmission lines is not as much about the destination as the journey. The size and length of the transmission lines, along with the size of the cooler, controls the temperature of the fluid. Also, the size of the engine and weight of the vehicle can determine the design of the transmission fluid cooling circuit.
Another thing to consider is how a modified transmission with a larger transmission cooling circuit might do more damage than good. On modern vehicles, the cooling circuit is designed to manage the fluid temperatures during startup. If the fluid can’t warm up quickly due to the increased volume, damage to the transmission friction surfaces can occur. The same goes for a bypassed cooling circuit. Why? Because fluid that is too hot can damage friction surfaces.

VIDEO: AAPEX 2016 Insights

Andrew Markel discusses his take on conversations he had with economists at AAPEX 2016, including the future of purchasing parts.

BMW Tech Tip: Oil Separator Replacement

A clogged oil separator valve is a common problem on many BMW DOHC inline sixes. The high failure rate is caused by sludge build-up that can result in oil burning, rough idle and engine fault codes. Although the solution is pretty simple, replacing the valve is labor intensive and can take anywhere from six to nine hours.

New IDUSA Premium Guard Website Offers Easy Access To Wide Range Of Oil, Air, Cabin, Fuel And Transmission Filters

The new website’s bi-lingual, responsive design features look-up powered by ShowMeTheParts.

VIDEO: How To Deal With Air Conditioning Smells

Andrew Markel discusses what to do to get rid of A/C smells after customers have tried to do it themselves.

Other Posts

Oil Bath Air Filters

Long before people started using cotton gauze air filters soaked in oil, the oil bath air filter was the dominant filter on the market. The filter removes debris in the air by running it over oil and a mesh element. These filters worked great when most roads were dirt, but they could be messy to clean.

On The Web – September 2016

Finding Failing O2 Sensors If an O2 sensor gets “lazy” because of old age or contamination, the computer may not be able to adjust the fuel mixture quickly enough as the engine’s operating conditions change. Related Articles – Join Underhood Service On LinkedIn – Honda Tech Tip: Oil Pressure Switch Fails Intermittently – Fuel Trim

Join Underhood Service On LinkedIn

Related Articles – Check Out The August Issue Of Underhood Service Magazine – Hayden Automotive Introduces Low-Profile Fan Clutch – Belt Inspection Checklist                     Underhood Service’s LinkedIn Page                         Underhood Service’s LinkedIn Group    

Honda Tech Tip: Oil Pressure Switch Fails Intermittently

The MIL comes on with one of these DTCS: P3400 (VPS Stuck Off Bank 1) or P3497 (VPS Stuck Off Bank 2). This may be the result of the front and/or rear rocker arm oil pressure switch intermittently failing.