This bulletin provides important service information to properly remove and install the A/C pressure transducer (see Figure 1) during A/C system repair.
Service Information:
1. When removing or installing the A/C pressure transducer, always support the hex portion of the sensor port with an open-ended wrench. See Figure 2. This prevents any damage to the A/C pipe due to the twisting force of the wrench.
Notice: Failure to do so may cause damage to the A/C pipe, resulting in refrigerant leakage.
2. While the sensor port is supported with the open-ended wrench, the A/C pressure transducer can now be safely removed or installed by using a deep socket wrench. See Figure 3.
> Refer to the applicable shop manual for the tightening torque specification.
Tool tip courtesy of ALLDATA.