Lisle Archives - UnderhoodService
Lisle Releases Glass Debris Cleaning Tool

This flexible tool assists in moving broken glass to an area it can be removed.

A Deutsch Connector Primer

There is more computing power in the average new vehicle than was on board the Apollo spacecraft that put men on the moon. That power comes from control modules, sensors, and other components that are linked together—and those links require connectors that can withstand the vibration, moisture, and other hazards without failure. GM’s Weather Pak

Lisle’s Camshaft Tool Locks Cams in Place

Use the tool to accurately line up and hold cams for proper timing chain alignment on Honda K-Series engines.

Useful Hanger From Lisle Keeps Your Creeper Off The Ground

This hanger from Lisle can be attached to most toolboxes, benches or walls to store plastic or metal creepers.

Lisle Adapt-a-Cap Ideal for Servicing Hard-To-Reach Fluids

Adapt-a-Cap eliminates the need for external pumps, hoses or funnels to transfer fluids, and helps prevent spills and messes.

Lisle Offers Button Connector Pliers

Disconnect fuel line, EVAP line and DEF fittings with tabs that must be depressed to disengage with these pliers.

Lisle Low Pro Filter Sockets Fit Popular Canister Sockets

Many applications are covered with this seven-piece set.

Lisle Drill Template Removes Broken Exhaust Manifold Bolts

Designed for the GM EcoTec3 5.3L and 6.2L Motors.

Lisle Long Hose Clamp Pliers Provides Extra-Long Reach

The cross-cut tip design grips most hose clamps from multiple angles. A ratcheting lock mechanism holds the clamp in an open position for hands-free use.

Lisle Manifold Drill Template Removes Broken Exhaust Manifold Bolts

The Lisle No. 71650 manifold drill template removes broken exhaust manifold bolts on GM EcoTec3 5.3L and 6.2L motors without damaging the cylinder head.

Lisle Introduces Battery Nut Pliers

The new Lisle Battery Nut Pliers are used to loosen or tighten battery terminal clamp nuts.

Lisle Lock Rod Release Tool For Ford Applications

Milled slots guide the tool onto the lock rod retainer and keep it in place as the rod is removed.