Tracer Products Offers Versatile, Dual-Head LED Leak Detection Flashlight – UnderhoodService

Tracer Products Offers Versatile, Dual-Head LED Leak Detection Flashlight

Tracer Products has introduced the Tracerline Vio-Blu - a cordless, dual-head LED flashlight that is ideal for locating all automotive system leaks. The Vio-Blu features a high-output True UV LED at one end and a super-bright blue light LED at the other. As a result, it provides optimal fluorescent response and contrast, regardless of the type of dye. This ensures that all leaks glow brilliantly.

Tracer Products has introduced the Tracerline Vio-Blu — a cordless, dual-head LED flashlight that is ideal for locating all automotive system leaks.

The Vio-Blu features a high-output True UV LED at one end and a super-bright blue light LED at the other. As a result, it provides optimal fluorescent response and contrast, regardless of the type of dye. This ensures that all leaks glow brilliantly.

The True UV LED fluoresces all Tracerline universal/ester and PAG A/C dyes, as well as TP-3400, TP-3405, TP-3900 and TP-3940 fluid dyes. Leaks can be seen even without using the yellow glasses provided. The blue light LED works with all oil-based dyes, including difficult-to-fluoresce yellow dyes.

With an inspection range of 25 feet (7.6 m) or more, this compact, lightweight lamp allows for easy access into tight, cramped areas. Its corrosion-resistant, anodized body stands up to years of heavy use. The Vio-Blu has a service life of 100,000 hours for each LED. It comes complete with a belt holster, three “AAA” batteries and fluorescence-enhancing glasses, all conveniently packaged in a full-color hanging clamshell.

For more information about the Tracerline Vio-Blu (P/N TP-9357CS) dual-head LED flashlight, call 1-800-641-1133. Outside the United States and Canada, call 516-333-1254. Website at www.tracerline.com.

You May Also Like

Detecting Misfire And Knock Conditions

Knock sensors are mounted on the block near the base of the cylinder head.

The knock sensor is a piezoelectric accelerometer that acts as a microphone on the engine. It converts vibrations into alternating current (AC) signal. When the crystal inside the sensor is vibrated, it produces an AC voltage. The greater the vibration or shock, the higher the voltage and frequency.

Mercedes Ignition Coil Pack Diagnostics

Replacing a single coil might not be the best approach to curing an engine of a chronic misfire.

Chrysler’s Totally Integrated Power Module

The TIPM is on the CAN bus, any issues with the communication between the ECM, ABS and BCM can cause problems with the TIPM.

Mercedes EQS Service Opportunities

EQ is the EV brand for Mercedes. It is the equivalent of Audi’s Etron or VW’s iD brands.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

Other Posts

A/C System Manifold Gauges

A basic gauge set will have three basic components.

Chassis Control Modules After Reconnecting Battery

To resolve the issue, fully disconnect the negative lead from the battery terminal.

HVAC Diagnostics

Knowing the cause of the complaint might require looking at several components.

Reflashing Power Supplies

A power supply to keep the system voltage consistent is a required piece of equipment to perform a reflash procedure.