You searched for ECM - Page 4 of 37 - UnderhoodService
Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Diagnosing Oxygen Sensors

Picking the right tool is critical. This video is sponsored by Auto Value and Bumper to Bumper.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Autel’s Scope, Meter and Frequency Generator VCMI

The VCMI has many features, such as a powerful 4-channel scope, a graphing multimeter, a waveform generator, and more.

Today’s Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and you’ll need a scan tool to measure the signals

OBDII Connectors

OBDII connectors serve as the main communication point between the technician and the vehicle.

A Closer Look: Gasoline Direct Injection (GDI)

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has

Throttle-By-Wire Diagnostics

Throttle-by-wire systems proactively manage the air and fuel going into the combustion chamber.

Hyundai & Kia Hybrid Drivetrain

The Hyundai hybrid system has a motor control unit (MCU) and hybrid control unit (HCU).

Different Nameplates, Different Expectations

One thing Asian nameplates share is that the system voltage must stay in a specific range during the reflashing procedure.