You searched for Pulley - Page 3 of 47 - UnderhoodService
VIDEO: Decoupler Pulleys

Andrew Markel shows how decoupler pulleys overcome belt issues like slippage from speed variations to keep the engine running efficiently.

Diagnosing Alternator Pulleys

When faced with an illuminated charge light diagnosis on most late-model ­vehicles, do not automatically assume the problem is inside the alternator and potentially unserviceable. The problem could be the pulley and belt drive system. Neglecting to test and ­diagnose the pulley can lead to unnecessary ­replacement.

Tension Pulley Installation: CT 887 for Daewoo and Chevrolet Aveo 1.4 16V, 1.5 16 V, 1.6 16 V

The moving indicator on the tension pulley breaks off during installation and severely damages the belt. Possible causes include: 1) Failure to loosen the water pump and to use it for adjusting the tension as described in the instructions; and 2) During the specified two full rotations of the engine at increased tension (hole marking on the base plate), the limit stop is subjected to excessive load and the moving indicator breaks off.

Tech Tip: Correct Pulley for 1983-’87 Mazda 626 or 1986 B2000 Water Pump

There was a mid-year change by the original manufacturer to a different style pulley. CARDONE is now supplying two pumps, one with square pulley teeth and one with round teeth.

Avoiding Alternator Comebacks: Did Your Supplier Provide the Right Pulley?

Automotive repair businesses that install remanufactured alternators are urged to verify that their units are equipped with overrunning alternator decoupler (OAD) pulleys for the growing number of late-model vehicles now requiring this advanced technology.

New Website Helps Jobbers, Installers Understand Recent Dramatic Changes in Alternator Pulley Technology

www.decouplerpulley.com helps parts professionals, technicians eliminate increasingly common belt-drive repair issues.

Toyota Supercharger: Squeak/Rattle Noises From Idler Pulley

Due to a possible out-of-tolerance condition on the idler pulley shaft, some pulleys may have bearings that spin on the inner shaft and may cause a squeaking or rattling noise. The supercharger may be perfectly fine and the source of the noise may simply be the idler pulley.

Continental Releases 67 New Part Numbers

Twenty-two new import part numbers, as well as 39 new pulley and tensioner part numbers, are immediately available.

Inspection Tips For Chain-Driven Water Pumps

If one water pump fails sooner and is replaced without an investigation, the new pump is likely doomed.

Water pump feature
Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.