You searched for evap - Page 49 of 50 - UnderhoodService
Increasing Summer Profits with A/C Work

Warm weather is just around the corner in many parts of the country, so it’s not too soon to start thinking about ways you can promote A/C service work and boost your profits this summer. More than 90% of new vehicles are now factory-equipped with air conditioning, and more than 80 percent of the cars

A/C Update

The Mobile Air Conditioning Society (MACS) 25th Anniversary Convention and Trade Show is a great event for shop owners and technicians to learn about the latest trends in air conditioning technology and to see the latest A/C service products and equipment. This year’s show was held in Las Vegas February 1-3. One question that came

Odds & Ends: Book Report

The last open road Author, vintage racer and vehicle enthusiast Burt “BS” Levy gives a fun, fictional account of the American racing industry of the 1950s in his book, the last open road. Originally published in 1994, the last open road is Levy’s first story in a three-novel series of books featuring 19-year-old Buddy Palumbo,

Checking into Mode $06

Mode 06 is the actual system test data that OBD II looks at when it decides to set a pending code or a current fault code. If the test data is within the limits established by the vehicle manufacturer, the item gets a PASS and no codes are set. But if a value is out of range, OBD II flags it with a FAIL and keeps an eye on the component until the system monitor has run at least twice. Then, if the problem is still there, a DTC is set and the MIL light comes on.

News: Underhood Service

CARQUEST Selects 2004 TECH-NET Professional/ASE Technician of the Year Raleigh, NC – Richard Robb of Elkhorn, WI, has been named the 2004 TECH-NET Professional/ASE Technician of the Year. Owner of Hi-Tech Automotive, Robb is an ASE-certified master automobile technician with L-1 certification. He was selected for the award after meeting the criteria set by CARQUEST

CO2 Systems Will Breathe New Life Into A/C Designs

SAE to work with the industry and the EPA to create efficient, environmentally sound automotive refrigerant systems, but how will it affect technicians and repair shop profits? The Society of Automotive Engineers (SAE) recently announced a cooperative research program that will work with the industry and the U.S. Environmental Protection Agency (EPA) to develop and

Underhood Service: Troubleshooting Troublesome Injectors

Clean fuel injectors are a must for peak engine performance, fuel economy and emissions. If the injectors are dirty and can’t deliver their normal dose of fuel, then performance, fuel economy and emissions are all going to suffer. Dirty injectors can’t flow as much fuel as clean ones, nor can they deliver the correct spray

Carburetor Repairs & Recalibrations

As a follow-up to “Dusting Off Fuel System Fossils” in April’s edition of Underhood Service, I will share many driveability concerns and emissions failures that I’ve repaired by rebuilding, and sometimes modifying, certain carb circuits. But before diving into a carburetor rebuild or recalibration, be certain that you understand the system you’re working on, including

Confronting the Complete Cooling System Service

By now, it’s obvious to most service shops that cooling system service is an absolute “must-do” on any nameplate. Once a cooling system suffers long-term neglect, it turns into an ongoing source of problems for the owner and his service technician because, when corrosion starts to take place, the effects can’t be reversed. For that

Mercedes-Benz Engine Diagnostics

I’ve always loved the puzzle. Check Engine warning lights have become an everyday chore for me over the last five years. It’s a challenge that extends my interest and creativity in the auto service profession. Before I deal with some specific Mercedes-Benz faults that I’ve researched, I must say that the ability to really solve