Matching Your Techs with the Right Job
Just a single decade ago, many industry experts speculated that 80% of the workflow passing through an independent repair shop would involve some type of high-level diagnostic process. Today, it’s obvious that, with the infusion of electronic operating systems, high-level diagnostics is now approaching that level of total workflow. Nevertheless, many others continue to ridicule
Understanding Today’s Multi-Coil Ignition Systems
Distributorless Ignition Systems (DIS) have been around for more than two decades, but in recent years the trend has been to multi-coil systems such as Coil On Plug (COP) or Coil Per Cylinder (CPC) ignition systems, and Coil Near Plug (CNP) ignition systems. COP systems have become the hot setup for a number of packaging,
Honda Timing Belt Replacement
Paying Attention to Detail Makes the Job Go Smoother
Driveability Series: Ford Water Pumps
An owner of a Ford vehicle is at your shop to have an oil and filter change. During the service, you notice a little coolant is leaking from the vehicle’s water pump. So, do you replace the pump or is a little coolant dripping normal? Well, the answer depends on how much coolant the pump
Flash Reprogramming
Would you believe flash reprogrammable PCMs have been in vehicles for more than a decade? The first such application was the 1990 Geo Storm. Why a humdrum car like the Storm would be the first to receive a flash reprogrammable computer system is unknown. You’d think GM would have chosen a more high profile vehicle
Analyzing Ignition Misfires and Plotting a Diagnostic Course
Uh oh. The Malfunction Indicator Lamp (MIL) is on, and you’ve just found a misfire code. It’s a code P0304, which tells you cylinder number four is misfiring. There are no other codes and the engine has a steady miss. Now what? Misfire diagnosis in this kind of situation should be fairly easy. You have