Honda Electrical System Diagnostics
This month, we’ll be taking a look at the charging and starting system on the Honda line of vehicles. Hondas are always welcome at our shop, as they are good, reliable cars that fix well and for which there is good service information and parts availability. Honda charging systems won’t present many problems for the
Timing Belt Replacement On 2.2- And 2.3-Liter Honda Accord Engines
These tips outline the belt replacement for the popular 2.2- and 2.3-liter Accord engines. The other Honda engines are similar, but don’t require the balance belt. They shouldn’t present any challenge to the experienced tech, but there are some things to keep in mind as you tackle these jobs. The 3.0-liter V6 models use a hydraulic
Timing Belt Replacement On 2.2- And 2.3-Liter Honda Accord Engines
These tips outline the belt replacement for the popular 2.2- and 2.3-liter Accord engines. The other Honda engines are similar, but don’t require the balance belt. They shouldn’t present any challenge to the experienced tech, but there are some things to keep in mind as you tackle these jobs.
Honda Tech Tip: Brake Pedal Feels Hard In The Mornings Or In Cold Weather
The brake pedal can feel hard during the first couple of brake applications, usually in the morning when the ambient temperature is cold. To correct, replace the brake booster and the master cylinder rod seal, and update the PGM-FI software using the reflash capable scan tool.
Snap-on Offers 1/2-Inch Drive Shallow Impact Socket For Servicing Honda And Acura Vehicles
Developed specifically to ease removal of the rear lower control arm bolts on 2001 and newer Honda Civic and Acura RSX vehicles, the Snap-on 1/2-inch Drive 16mm 10-point Shallow Impact Socket (DPSM16) is a durable, long-lasting tool that is heat treated to a lower hardness to add impact resistance and ductility.
Honda Tech Tip: Rattle From The Rear Shelf
Honda Accord owners may complain about a rattle that can be heard from the rear shelf area. Do not confuse this with worn upper strut mounts. The probable cause is the dynamic damper does not fit tightly against the rear shelf. To correct this, install washers between the dynamic damper and the rear shelf.
Thumping Noise At Cold Start On Honda Accord
Honda Accord owners may report a thump as the ignition switch is released from the start position or as the engine starts. This noise sounds similar to a rubber mallet striking the frame and occurs only on a cold start (the vehicle has been sitting for some time, usually overnight).
New Snap-on 1/2-Inch Drive Shallow Impact Socket A ‘Must Have’ For Servicing Honda And Acura Vehicles
The new Snap-on 1/2-inch Drive 16mm 10-point Shallow Impact Socket (DPSM16) for servicing 10-point rear lower control arm bolts on Honda and Acura vehicles is the ideal tool to help technicians service these vehicles, said the company.
Honda Pilot Suspension And Alignment Inspection
The Pilot employs a strut-type front suspension that provides a generous 7.3 inches of wheel travel. Separate load paths to the unit body are provided for the coil spring and the shock absorber to reduce road noise. A solid 0.9-inch stabilizer bar is linked directly to the strut via ball-joint connections to reduce body roll during cornering maneuvers.
Customer States: Honda Soda Can Tab Fix
As I removed the timing belt and balance shaft belt, I noticed this soda can tab holding one of the crank sensors in place. Apparently, the customer knew of this from a year ago when the balance shaft belt broke but couldn’t afford the sensor or a new water pump.