Walker Products Goes Solar at Missouri Plants – UnderhoodService

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Underhood Service Logo
Technical resources to help diagnose and repair engine-related service issues.
Engine

Walker Products Goes Solar at Missouri Plants

Walker Products Inc. of Garden Grove, CA, recently announced it has completed the installation of Solar Energy Panels at its three manufacturing and distribution plants in Pacific, MO.

Underhood Service Staff Writers
By Underhood Service Staff Writers
Published:

Walker Products Inc. of Garden Grove, CA, recently announced it has completed the installation of Solar Energy Panels at its three manufacturing and distribution plants in Pacific, MO.  Walker expects that the solar panels will provide a minimum of 60% of the three plants’ energy needs.  Walker is proud that this installation is the very first solar project to utilize a 335 watt “Lifeline Solar” monocrystalline solar panel in the state of Missouri. 

Related Articles

This environmentally friendly theme is consistent with Walker’s product line strategy.  Walker is known around the globe as a leader in the category of Oxygen Sensors which determine the oxygen content of exhaust gas and monitor air/fuel mixture to maximize fuel economy and minimize emissions.

For any additional information, log on to the company’s website at www.walkerproducts.com.                          

You May Also Like

Internal Engine

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Andrew Markel
By Andrew Markel
Andrew Markel is the director of content for Underhood Service magazine. He has been with Babcox Media for 20 years. He is a technician and former service writer and holds several automotive certifications from ASE and ­aftermarket manufacturers.
Published:

In the 1960s, coolant was changed twice a year. In the fall, antifreeze with ethylene glycol-based coolant was put into the engine to prevent the coolant from freezing and cracking the block when a cold front hit. Often, if the engine got hot, the antifreeze would boil off. In the spring, the engine would be drained and filled with water and maybe a small can of an anti-corrosion treatment.

Read Full Article

More Engine Posts
Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

By Andrew Markel
Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

By Andrew Markel
Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

By Andrew Markel
Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

By Andrew Markel

Other Posts

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

By Underhood Service Staff Writers
Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

By Andrew Markel
Subaru EJ25 Head Gasket Problems

Most of the EJ head gasket failures occur around the 100,000-mile mark and start as a slow oil or coolant leak.

By Andrew Markel
New Oil Specifications

Many 0W16 oils have a new donut certification mark on the bottle called API SN-PLUS and SN-PLUS Resource Conserving.

By Andrew Markel