Volkswagen Check Engine Light Is On, Trouble Code P2181 – UnderhoodService

Volkswagen Check Engine Light Is On, Trouble Code P2181

Trouble Code P2181 (18613) is for cooling system performance. It generally means that the vehicle has a defective or leaking thermostat. If the vehicle does not warm up quickly enough to go into closed loop operation within the time programmed into the engine control module, it will set this code. This is generally cured by replacing the thermostat.

Vehicle Application:
2002 Golf GTI 1.8L and Jetta GLS Wagon 1.8L;
2003 Beetle 1.8L and 2.0L; Jetta GLS Wagon 1.8L and GLS 2.0L; and Passat 1.8L;
2004 Beetle 1.8L and 2.0L; Jetta 2.0L and GLS 2.0L;
2005 Beetle 2.0L; and
2006 Passat 2.0T 2.0L

Customer Concern:
Check Engine light is on. Trouble code: P2181 (18613).

Potential Causes:
• Connector;
• Defective Coolant Temperature Sensor (CTS) Wiring; and
• Defective Thermostat.

Tests/Procedures:
1. Measure engine temperature and ensure it is getting up to proper operating temperature.
2. Connect a Volkswagen-compatible scan tool and monitor engine temperature on the scan tool. Compare to the actual engine temperature to determine if the coolant sensor is working correctly.

Tech Tips: Code P2181 (18613) is for cooling system performance. It generally means that the vehicle has a defective or leaking thermostat. If the vehicle does not warm up quickly enough to go into closed loop operation within the time programmed into the engine control module, it will set this code. This is generally cured by replacing the thermostat.

Courtesy of Identifix, Inc.

You May Also Like

Beyond the Warranty

What does it take to keep a car going for 120,000, 180,000 or 250,000 miles? The key is maintenance and inspection. 

Step up maintenance to go farther

What happens after the bumper-to-bumper warranty and powertrain warranty wear out? If you look at any factory-recommended service intervals, after 100,000 miles they cease to exist.

What does it take to keep a car going for 120,000, 180,000 or 250,000 miles? The key is maintenance and inspection. 

Misfire Codes P0300, P0301-P0312 and P0313+P0314

The only way to clear the code is to use a crankshaft position relearn with a scan tool.

What Caused The Turbo To Fail?

Up to 50% of turbocharger failures are due to oiling problems.

Valve Lifter Technology

Hydraulic lifters are precision-fit assemblies.

Supercharger Pros And Cons

Customers generally look to superchargers for the instant throttle response, not fuel economy.

Other Posts
It’s Got Spark!

Why can’t you trust some spark tests?

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated.

Lifter Deactivation

The area of contact between the lifters and cam lobes is the highest loaded surface inside an engine.