VIDEO: The Complete Blower Motor Repair

VIDEO: The Complete Blower Motor Repair

Be sure to inspect the blower motor and connectors. This video is sponsored by The Network Academy.

A customer comes into a shop and asks why her blower motor is humming.

The man behind the counter says, “Well, it might not know the words.”

As a service advisor, you are the conduit between the technician and the customer. You are also an advocate and EDUCATOR for the customer. Every day, you can create win-win situations that benefit the customer, technician and shop. One such opportunity can be blower motor repairs.

The next time a technician submits a repair order that recommends replacing the blower motor resistor, you might want to ask him to perform further inspections and tests of the blower motor and connectors. By doing this, you can avoid a comeback and increase sales.

Ask the technician if he inspected the HVAC case drain to ensure that water can drain properly.  Also have him verify that the cabin air filter is clean or go ahead and recommend that a new one be installed. 

Ask the technician if he inspected the blower motor, and performed a check to see how many amps it draws. Also, ask him if he looked at the connector for the blower motor resistor.

Why? As the original blower motor ages, it becomes more difficult to turn. This increases stress and heat on the blower motor resistor. Also, dirt and debris in the blower motor house can cause even more stress on the blower motor resistor, causing it to burn out.

The additional stress on the circuit from the old blower motor causes heat that damages the connector. This can cause the connector to melt and lead to a bad connection when the new blower motor resistor is installed.

If just the blower motor resistor is replaced, the new part could fail quickly and cause an unhappy customer. By inspecting the blower motor and connectors, you can provide the customer with a complete repair that takes only one trip.

It also provides your shop with additional parts and labor sales. This is a “win-win-win” for your customers, technicians and shop – and will have everyone singing your praises.

This video is sponsored by The Network Academy.

You May Also Like

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Welcome to Rustgard, rust and corrosion preventive oil by Lubegard, product overview.

Rust and corrosion can destroy tools and equipment, and it only takes a little moisture to trigger rust. Whether in your garage, shed, or shop, temperature and humidity levels are constantly fluctuating and your tools and equipment need to be protected.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

2007-2021 Toyota Tundra Strut Replacement (VIDEO)

Follow along the step by step installation process for struts on 2007-2021 Toyota Tundra’s. This video is sponsored by PRT.

AMN Drivetime: MEMA Leaders Chat About The Future

MEMA leaders sat down with Bill Babcox to share a few updates on the realignment of the association announced in November.

Ford F-250 Shock Replacement (VIDEO)

Follow along the step by step installation process of shocks on a Ford F-250. This video is sponsored by PRT.

Other Posts

Creating Parts: The Manufacturing Process (Video)

Creating parts takes many steps worth of work. Sponsored by AP Emissions.

Direct Fit Catalytic Converters Features and Benefits

Four qualities stand out the most when looking at these catalytic converters. Sponsored by AP Emissions.

Engine Control Modules (VIDEO)

Accurate diagnosis of any suspected ECM-related fault is important. This video is sponsored by The Group Training Academy.

ECM/PCM Communication Issues (VIDEO)

Before you swap out a module that won’t communicate, do a few simple inspections. Sponsored by The Group Training Academy.