VIDEO: REMOVE THE BELT FOR INSPECTION

VIDEO: Remove The Belt For Inspection

Removing the belt allows you to inspect idler pulleys and other components. This video is sponsored by Continental.

When diagnosing a belt noise or wear problem, it is critical to remove the belt and perform a full inspection of the entire belt, both front and back. If you are looking at the belt on the engine, even at the longest run, you could be missing damage that is localized.

Remove the belt and look at all of its surfaces, including the back, front and sides. If the abnormal wear is isolated, it is a sign the belt was damaged during installation, or an incident occurred where an object came between the belt and pulley. The typical symptom of installation damage is rib separation from a 1- to 2-inch area of the belt. This can occur if the belt was pinched or pried into position with a sharp object.

If the rib separation is consistent on the belt, it is usually a signal of high underhood temperatures. The heat is generated not only by the engine, but also the flexing of the belt as it travels along the pulleys. Also, slipping on the pulleys creates friction and heat. Heat breaks down the materials of the belt and causes oxidation.

Just remember! Most modern EPDM belts will not crack like older belts made of less advanced material. If there are cracks, it is a sign the belt has been contaminated by fluids or exposed to high heat.

The other benefit of removing the belt is it will allow you to inspect idler pulleys and other components for noise and play.

This video is sponsored by Continental.

You May Also Like

Jack Oil: How to Refill and Bleed Floor and Bottle Jacks

The video covers the complete functional restoration of my oldest jack and monthly maintenance on a transmission jack. This video is sponsored by Bar’s Leaks

Looking at the other jack oil videos on YouTube, the one type of video that is missing is an actual jack maintenance procedure. This video covers refilling a jack and how the seal conditioners inside Bar’s Leak Jack Oil can condition the seals to prevent leaks. The video covers the complete functional restoration of our oldest jack and monthly maintenance on a transmission jack.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

Understanding the OAD Pulley

Discover the ins and outs of OAD pulleys, their role in belt drive systems, and learn the tricks of diagnosis and replacement. This video is sponsored by Continental.

Other Posts

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the overall efficiency and range of the EV, increasing the range of an EV by up to 20%.

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.