Tracer Products Introduces Rechargeable, True UV LED Leak Detection Flashlight – UnderhoodService

Tracer Products Introduces Rechargeable, True UV LED Leak Detection Flashlight

Tracer Products has unveiled the Tracerline OPTI-PRO Max - a cordless, state-of-the-art, true UV (violet light) LED leak detection flashlight. The OPTI-PRO Max works with all Tracerline universal/ester and PAG A/C dyes, as well as TP-3400, TP-3405, TP-3900 and TP-3940 fluid dyes.

Tracer Products has unveiled the Tracerline OPTI-PRO Max — a cordless, state-of-the-art, true UV (violet light) LED leak detection flashlight. It makes automotive leaks easy to spot, while slashing valuable diagnostic time for technicians.
 
The OPTI-PRO Max works with all Tracerline universal/ester and PAG A/C dyes, as well as TP-3400, TP-3405, TP-3900 and TP-3940 fluid dyes. Leaks can be seen using the true UV LED light even without using the yellow glasses provided. This powerful unit is specially designed to fluoresce dyes brighter and with greater contrast than standard blue light inspection lamps.
 
With an inspection range of 25 feet (7.6 m) or more, the OPTI-PRO Max easily gets into tight, cramped areas that larger lamps can’t. Its rugged, corrosion-resistant, anodized aluminum body stands up to years of heavy shop use. Powered by a rechargeable lithium-ion battery, the lamp provides 4 hours of continuous inspection between charges! The unit has a 100,000-hour LED service life.
 
The OPTI-PRO Max comes complete with a lanyard, rechargeable battery, smart AC charger and fluorescence-enhancing glasses.
 
For more information about the Tracerline OPTI-PRO Max (P/N TP-8630) True UV LED flashlight, visit www.tracerline.com or call 1-800-641-1133. Outside the United States and Canada, call 516-333-1254.

You May Also Like

OBDII Connectors

OBDII connectors serve as the main communication point between the technician and the vehicle.

The OBDII connector is more than 25 years old, and many technicians now take this port for granted. For more than two decades the Diagnostic Logic Connector (DLC) has remained largely the same. It is more than just the location a scan tool plugs into. It is the access point which allows technicians to “talk” to the vehicle.

Detecting Misfire And Knock Conditions

Knock sensors are mounted on the block near the base of the cylinder head.

CAN Bus Communications

There are three types of bus configurations that you will come in contact with — loop, star and a hybrid of both.

Batteries – AGM Failures

Providing your customer with the correct group size and type of replacement battery is more important than ever.

Do You Know The Cause Of A No-Spark Condition?

A no-spark condition could be the result of communication errors or missing data from a dead module.

Other Posts

Fuel Trims

To gain a better perspective on fuel trims, think about how “analog” vehicles dealt with changing fuel and air mixtures.

It Worked Before I Brought It In

These words can drive any repair facility crazy.

Chrysler No-Start After Being Parked

When leaving a Chrysler PT Cruiser parked for an extended period of time, it could fail to start.

Different Nameplates, Different Expectations

One thing Asian nameplates share is that the system voltage must stay in a specific range during the reflashing procedure.