Toyota Tech Tip: Fuel Gauge Inclination Meter Reset – UnderhoodService

Toyota Tech Tip: Fuel Gauge Inclination Meter Reset

Due to the unique bladder design of the 2001-'03 Prius fuel tank, it may be necessary to reset the fuel gauge inclination sensor if the combination meter has been replaced or the fuel level reading is determined to be inaccurate. Follow the procedure in this tech tip to reset the fuel gauge inclination sensor.

Due to the unique bladder design of the 2001-’03 Prius fuel tank, it may be necessary to reset the fuel gauge inclination sensor if the combination meter has been replaced or the fuel level reading is determined to be inaccurate. Follow the procedure below to reset the fuel gauge inclination sensor.

Reset Procedure (See Fig. 1 and Fig. 2):


1. Park the vehicle on a level surface.

2. Turn the ignition switch to the “ON” position.

3. Place the odometer display into the “ODO” mode.

4. Turn off the ignition switch.

5. Depress and hold the “ODO/TRIP” button while turning the ignition switch to the “ON” position. Hold the ODO button for two seconds.

6. Release and press the ODO button three more times within five seconds:
Release-Press-Release-Press-Release-Press and Hold. Continue to hold the ODO button for at least five seconds until the leveling information is displayed on the odometer.

7. Release the button.

8. Depress and hold the “ODO/TRIP” button until the odometer display confirms that reset has begun (odometer reads “1”).

9. Once reset is complete, the odometer returns to normal.

10. Release the button.

11. Turn off the ignition.

Note: This procedure may take several attempts. If you are interrupted or make a mistake during any part of this process, you must start over from the beginning of the entire process. Each time you start again, remove the key from the ignition and wait at least five seconds.

Technical service bulletin courtesy of Mitchell 1.

For additional information, visit www.mitchell1.com.

You May Also Like

Is Training For The Sake Of Training Always Worth It?

Technology changes every day. Are you keeping your techs in top shape?

We all know the value of training - or do we? Is it always valuable? Is it alway effective? Should it always take top priority?

Naturally, you want to say yes, but experts say the RIGHT training for your team's needs is what's really crucial.

This episode of Talking Shop with ShopOwner focuses on the challenges of training technicians and service advisors in the automotive industry. The guests, Dave Boyes and Ron Shanas from Today's Class, discuss the importance of training in a rapidly changing technological landscape and the difficulties shop owners face in finding time for training amidst busy schedules.

Comprehensive Guide to Serpentine Belt and Drive System Maintenance

Properly maintaining the entire drive system prevents premature belt wear and system failure, ensuring customer satisfaction and vehicle reliability.

Randy Breaux, Group President, GPC North America, Talks to AMN Drivetime

At NAPA, “Breaux Knows” business relationships, ABCs to avoid, and serving the automotive professional.

Understanding Customer Clunking And Clicking Complaints

Can Your Techs Diagnose and Repair Modern Axle Complaints?

BMW Spark Plug Replacement

Here are a few things that you need to know before replacing spark plugs in a BMW.

Other Posts

Blink CEO to Present at Energy, Power & Renewables Conference

The event is scheduled for June 17 at 1:10 p.m. ET.

How Modern Car Sensors Optimize Performance and Emissions

Learn how Standard ensures accuracy, speed, and durability in their sensors to maximize engine performance and efficiency.

Tool Time Podcast: Lumileds

Nadine and Eric sit down with Lumileds’ Aubry Baugh to discuss all the professional lighting solutions the company has to offer.

Diagnosing Intercooler Boost Trouble Code P0299

The criteria for setting the code is very basic.