Tech Tip: Understanding Electrical Basics Can Save Technicians Time and Money – UnderhoodService

Tech Tip: Understanding Electrical Basics Can Save Technicians Time and Money

Sophisticated automotive electrical systems can cause increasing amounts of dead batteries, intermittent warning lights and general electrical complaints. When addressing these issues, staying focused on the basics can save you time, money and nerves.

by The WORLDPAC Training Institute (WTI) Team

Sophisticated automotive electrical systems can cause increasing amounts of dead batteries, intermittent warning lights and general electrical complaints. When addressing these issues, staying focused on the basics can save you time, money and nerves.

Automotive electrical basics are:
• Connection condition;
• Battery condition; and
• Alternator condition.

Connection Condition
In order of importance, connection condition (at least to the battery) really does come first. Without a good solid connection to the battery, the vehicle may not start, charge, or it could generate a few unwanted electrical gremlins. Clean tight connections from the battery to the chassis grounds and to the alternator and starter motor will eliminate subtle electrical gremlins. The condition of all electrical connections and the circuits they connect to can be easily tested using the voltage drop test. You will find bad relays, bad fuses, poor connections and faulty ignition switches within minutes (opposed to hour or days.) This may be the single most important test for technicians to implement into diagnostic routing when searching for a cause to an intermittent electrical complaint.

Battery Condition
Battery condition is paramount on today’s vehicles because the on-board computers will be the first to react to a problem within the battery. Computers are reliant on continuous, uninterrupted current flow between the positive and negative terminals of the battery. One bad plate in the battery can cause a multitude of electrical problems after you start the engine. You may be thinking, “That’s odd, I thought if the battery was bad the starter motor wouldn’t crank the engine?” Not true. As a technician on today’s vehicles, you need to toss out this old thought process. Before addressing electrical complaints on late-model vehicles, check the condition of the battery to ensure it is not the cause of the current fault.

Alternator Condition
After a battery has been determined to be in good condition, you will need to determine the condition of the alternator. With the numerous electronics operating late-model vehicles, the alternator output on some cars may exceed 200 amps! With that much output, the main power lead to the alternator may be fuse protected. Before replacing an alternator because of “no output,” double check the manufacturer’s information regarding their test procedures. You may discover that a fuse, fusible link or specially designed cable is the cause of the no output problem. One other note, be advised that some late-model vehicles could have alternators that are networked and diagnosing them will be different.

Tech Tip courtesy of WORLDPAC Training Institute (WTI).

For additional information on WORLDPAC Training Institute (WTI) and products offered by WORLDPAC, visit www.worldpac.com.

You May Also Like

FLO, GM Activate Plug and Charge for GM EV Drivers in Canada

FLO’s technology confirms identification, authorizes the charging session and activates billing without any additional action from the driver.

FLO and General Motors activated the Plug and Charge capability at all DC fast chargers on the FLO network across Canada. All GM EV drivers are provided with access to GM’s Plug and Charge, which is enabled by FLO’s autocharge software. The feature allows GM EV drivers to begin a fast-charging session by plugging in their vehicle at one of FLO’s fast charging stations across Canada, the company said.

Schaeffler and Sustainability with Jerry Conroy

Conroy shares insights into his career trajectory, the evolving landscape of the company’s aftermarket operations, and its commitment to innovation and sustainability.

Flushing the Brake Fluid is Critical on Every Brake Repair

Making sure the brake fluid is the correct quality is critical. Sponsored by Auto Value and Bumper to Bumper.

Selecting the Right Oil for your Customers Engine

Learn how to educate customers on the importance of OEM specifications and premium lubrication for their vehicles’ maintenance needs.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Other Posts

Inspection Tips For Chain-Driven Water Pumps

If one water pump fails sooner and is replaced without an investigation, the new pump is likely doomed.

Water pump feature
Power Window Regulator and Motor Service

Power windows are great as long as they roll up and down when commanded to do so.

Philips Announces GoPure GP5212 Automotive Air Purifier

It uses a 3-layer filter to deliver cleaner, healthier, fresher air on the go, Lumileds said.

Snap-on Announces Latest Software Release

The latest software includes new coverage and guided component tests and features.